Thanks for the reply and info.
We're rolling out 60 odd A3 machines with customised displays, card readers and papercut soon. We are hoping this reduces the run up time enough to make the effort...
Type: Posts; User: dogsbody
Thanks for the reply and info.
We're rolling out 60 odd A3 machines with customised displays, card readers and papercut soon. We are hoping this reduces the run up time enough to make the effort...
Is anyone using FleetRMM? We've been looking at this past month and it's got potentional but for somethings there is a learning curve. My question for those that may be using it is has anyone gotten...
Thankyou,
Woxner, it is server 2012, I trust the IT company that set up the share. They have existing bizhub c280's and 223's that I was able to configure and get to work.
Gaffers01, thankyou...
Hey all, I have a Bizhub 206 that refuses to scan SMB. The folders are shared correctly however no combination of file path username/password works. It does print a TX report with an error code,...
Hi Everyone,
We recently sold our showroom c7000 to a new customer and everything was perfect in the office but once we got it onsite tray 4 (LU-202) can't be selected. It is picked up by the print...
There sould be a downloads section on the web interface of the fiery, you will find the driver for windows and mac there.
Cheers.
and 47-91 resets the dev counter.
I agree, I carry Firefox portable on a USB stick for the sites that don't/can't install Firefox.
Cheers.
C450, C351, C250, C252, C352 and C300 all use common touch panels #4037780701. The touch panel isn't listed in C350 parts manual, just a unit that looks like the display panel as well.
Cheers.
"Separate Scan" in scan settings.
Cheers
If you are going to post at least make sure it is for the right machine, that is C203/253/353. C351 is a slower C450 nothing like what you have described.
As the others have said it is not hard to...
Here is a recent radar image of cyclone Yasi, and a link to the news story it came from. Nothing good is happening up there. Cyclone Yasi: Category Five Cyclone | Yasi Damaging Nth Qld
8210
...
Hi everybody,
The local university wants to implent a policy that states 300dpi as the minimum scanning resolution for archiving documents. Obviously the default can be set at 300dpi but the...
You only need to do A4 or A3, not both. Doesn't hurt to do both, just depends on how much time you have to burn.
Merry Christmas.
White shirts were quite painful always filthy, now black pants, black shoes/boots, company and manufacturer logos on black shirt (short or long). Gets a little warm in summer but easier to keep...
Fusing low temperature abnormality. Could be any of the temp sensors, lamps, AC driver board or printer control board, or it may just need to be reset.
Cheers.
This is coming from another angle.
Any chance you misquoted the code and it is a C-3508 after 4 J31-02's with a heavy toner coverage on the page? I ask this because you mentioned it only occurs on...
Only 8000Kbs at home, 24Mbs at work. Never get anywhere near the stated speeds. I am on a congested RIM at home so when the school kids get on at night I am somtimes reduced to little better than...
Your taking me back, the shaft that the actuator is on will sometimes rub on the small metal arms at the top of the exit assembly. You can reform the arms, file a bit out or replace them. you may see...
Mr Who has the right idea. Magenta Image Unit.
Cheers.
Most of my production colour customers don't use the print driver, they import straight into Command Workstation and set the job up there. That will work for PDF and PS files but any unsupported...
JSC is right. I usually keep one from an old belt that was still good, wont help now but will in the future.
Cheers.
A clean machine is a good machine. It is not hard to clean the paper dust collectors and filters.
Take the time to clean the rollers, it is also not hard and doesn't take too much time.
Clean the...
You are correct, same part number. And I agree, touch panel not the LCD.
Accessibility is a hard button on the left hand side of the panel.
Setup your print driver with a greyscale default on the Quality tab of Printing Preferences.