Search:

Type: Posts; User: gkalman2004

Page 1 of 7 1 2 3 4

Search: Search took 0.33 seconds.

  1. Replies
    34
    Views
    14,458

    Re: MP C305 firmware?

    Yes it is old. Sorry i lose my account from ricoh now 3 years ago when i start to work with toshiba, hp, lexmark,brother.

    gkalman
  2. [Jamming] Re: IR 3045 IR 4570 jam 0A01 0A05 Power on / Start up jam

    Yes i remove it, but i not check the pre-registration sensor flag because i did not know she had also there one .
    Thank you, i will check tomorow also this tip.
  3. [Jamming] Re: IR 3045 IR 4570 jam 0A01 0A05 Power on / Start up jam

    Hi everybody

    I know it is older post but i have the same issue 0A01 with one almost new IR2530i, i changed all the sensors from the pick up assembly and i change the clutch's beetween them...
  4. Replies
    7
    Views
    4,771

    Re: Toshiba 456 Firmware

    For what type of ADF? Both firmware version have 800MB
    4CCD – Yellow
    3CCD - Red
    Find under the glas the Yellow or Red mark on the right corner or on the CCD.
    If you write the wrong firmware you...
  5. Re: I need toshiba e-studio 206l 256 306 356 456 506 s-se service manual

    The service manual size is 51.9MB i have it if still need it someone

    SERVICE MANUAL
    MULTIFUNCTIONAL DIGITAL SYSTEMS
    e-STUDIO206L/256/306/356/456/506
    e-STUDIO306S/356S/456S...
  6. Replies
    11
    Views
    8,877

    [Error Code] Re: Ricoh mpc 3002 SC 220-01 and now 992

    Hi

    I have the file if you need it get it form here https://mega.nz/#!vol1zTwb!CZLpkRYvHTCGEAIflJPt4fTNIcqySSuTmwK02nlEEVs
  7. Replies
    0
    Views
    1,395

    Lexmark x860de 201.00 paper jam

    Hi everybody

    I have a Lexmark MFP with 201.00 error. I changed all the transfer roll asembly, registration clutch and printer engine card
    If i take out the transfer roller the mfp print out white...
  8. Replies
    6
    Views
    2,200

    Re: Fuser Question

    it is not wrong machine it is wrong country...
    The same machine can be used in china, us, ue etc..
  9. Re: MP2851 can't scan to new Windows 10 computer, others still work

    Check with firewall and antivirus disabled.
    Also check if the share is accessible from other pc.
  10. Replies
    5
    Views
    621

    Re: A267-2803 MP2550

    A267-2803 isn't it Paper End Feeler? ( Actuator for Paper End Sensor)
    Sensor is AW02 0141 Photointerruptor at least usualy ricoh note sensors with AW
  11. [Electrical] Re: MP6001/7001/8001 vs MP9001 developing motor

    The speed will be no problem the machine will not slows down, but the power it is and the motor will work less than the original because long run printing will produce heating and the heating will...
  12. [Electrical] Re: MP6001/7001/8001 vs MP9001 developing motor

    For the same MP9002 you can get
    D131 5122 PCB: BCU: 60-75CPM:
    D133 5122 PCB: BCU: 90CPM:

    Regard's
  13. [Electrical] Re: MP6001/7001/8001 vs MP9001 developing motor

    " Or one of those silly marketing plots?"
    The speed difference is from the controller not the motor
    The motor will work well, maybe the lifetime will be shorter but nothing disturbing
  14. Replies
    3
    Views
    996

    [Dead] Re: Ricoh MP 2000 Stuck with error code

    Controller or nvram error, usualy the controller is faulty and the nvram is ok.
    If you have a working machine take out the controller with the nvram and test on the faulty one.
    If you change the...
  15. MP C2500 finisher puncher 4 holes and no 2 holes setting

    Hi

    I fix an old sr3000 booklet finisher and i also repair an incomplete puncher (it was defect with missing electronic pcb)
    I order everything also the electronic pcb and i make it to work.
    The...
  16. Replies
    6
    Views
    1,033

    Re: aficio 2035 problem

    Thank's
    The cleaning blade was replaced already and i don't want to put new drum until i don't find why i have toner powder everywhere i will change first
    AA15 0671 Shield - Collection Coil and...
  17. Replies
    6
    Views
    1,033

    aficio 2035 problem

    Hi

    I have an old machine with printing problem i changed the development unit, the developer, id-sensor, charge roller, cleaning blade, secondary charge roller cleaning blade, i do id senzor init,...
  18. Replies
    1
    Views
    893

    [CQ] Re: Ricoh MPC2500 Blue line

    Replace PCU:C or clean charge roller
  19. Re: Ricoh Mpc2550 will not "auto obtain ip address"

    Print the network configuration from the machine from tolls-> system settings -> interface setting -> print list
    Take a laptop and a cable and conect with a laptop directly after you change the ip...
  20. Re: RICOH C3300 Latest Firmware for Windows 10 SMB fix?

    yes i use scan to folder on MP C2500/2800/3300
    for MP C2500 it is needed a custom firmware for the 2800/3300 the lastest firmware will work.
    Just create a new user ex: "scan" with a password,...
  21. Re: RICOH C3300 Latest Firmware for Windows 10 SMB fix?

    For mp c2500 it is a customized firmware for windows 10 smb scaning.
    I used it with succes more times.
    But for MP C2800 i use the lastest firmware and it work with windows 10.
    Some setup for...
  22. Replies
    1
    Views
    968

    Re: MP C8002 J029 ERROR

    Hi
    I fixed the machine j029 it was paper stuck in the space between finisher and removed incomplectly by the user.
    The machine in case of paper misfeed "D" instruct the user to open the finisher...
  23. Replies
    1
    Views
    968

    MP C8002 J029 ERROR

    Hi

    I have a problem with a new mp c8002 first with the developer motor sc326-00 what i fixed but after i receive paper misfeed what i also fixed with sp 1134 -001
    And the machine print simple...
  24. Replies
    11
    Views
    8,877

    [Error Code] Re: Ricoh mpc 3002 SC 220-01 and now 992

    I have the same issue almost, i also change the IPU the lasser unit and nothing worked until in my case i changed the harness .
    I can't tell if this will be also in this case but changing the cable...
  25. Replies
    11
    Views
    8,877

    [Error Code] Re: Ricoh mpc 3002 SC 220-01 and now 992

    Double check the part numbers on my order one cable the sync was with different harness.
Results 1 to 25 of 165
Page 1 of 7 1 2 3 4