check this link
https://youtu.be/hDSzS_yhwEc
Type: Posts; User: pascalb.
check this link
https://youtu.be/hDSzS_yhwEc
Hello,
I think the problem is that gmail has switched to double authentication.
here is an explanatory video.
...
Hello,
it may be necessary to check the supply of ink in the DV.
the HOPPER set
clogged pipe
or torn felt
i had the problem
54507
Hello,
I have this BT which corresponds to your machine
54182
to check
Hello,
as well as blackcat i had dusty lasers on this machine.
Customer smoking next to the machine or very dusty environment.:(
Good luck
Hello,
just for info, I found the BT of the TA 4056i which corresponds to the 4002i at Kyo.
For noises at the ejection, I had often a few years ago
54088
Attention Avio2
Your picture matches the transfer contacts.
the PWB and DV high tension drum is located under the drive assembly.
54074
Hello,
What are the values in SIM 110
hello,
Maybe the lasers should be reset?
U467 / Color Regist switch to Off
switch off /on, the machine.
return to U467 / Color Regist reset to On
then do a Color Registration manual in System...
Hello,
Personally I think a cyan bias problem.
have you checked the high voltage?
Hello,
it is a problem of improper cleaning of the belt.
if the problem is the same with a new belt i think the waste toner is clogged.
did you have C2810 codes.
have a good day.
Hello,
for this problem personally I test:
- If the cartridge turns (drive)
- U135 / toner sensor (if out of range change the hopper)
the hopper is managed by the image feed.
- Check if the...
Hello,
for information I already had exactly the same problem.
solved by changing the transfer belt.
have a good day.
Hello ,
I had the same type of problem
the client had broken and removed the (Guide VF Right)
Check if the guide is good.
46705
good luck
Hello,
I think OPT = Optional language data 2ND_OPT_sign.bin
below the error codes
46435
have a good day
Yes on the range which does not use the RFID technique, it is a direct contact by springs.
If the chip on the cartridge breaks the 3.3V circuit, you get C0150 or F040 because no more communication...
Hello
I recommend going to SIM 004
and check the serial numbers
Engine & Main
imperative the Engine number must be the machine number.
that's it?
Hello
for this generation of machine it is necessary to think of modifying the SMB port of the address book
go from 139 to 445
have a good day
Hello
You have to make the latest Firmware.
I had a technical bulletin which spoke about this problem.
good luck
Hello,
do you have a FAX?
this is what I found
"C0950: FAX job stay error
Print processing of the received FAX could not be executed and the job continues staying."
have a good day
Hi ,
- Does it work on cassette 2 in A4?
- Have you tested with another paper?
sometimes the paper is badly cut and takes several sheets.
I have already met him.
Kind regards
Hello,
I agree with John.
if the Main charge counter is higher than the Drum counter we have a C51XX
Good day.
Hello everyone
I wish you a happy new year 2019.
to talk job, I am looking for the system for a Fiery (13) Controller for TASKALFA 3050ci / 3550ci / 4550ci / 5550ci / 6550ci / 7550ci.
Thank you.
default setting
39823
After
39824
Hello
my problem is solved by putting all the values of the SIM 246 a (0)
thanks to my support Triumph Adler.