Search:

Thanks for all the help, I really appreciate it!
I got over there today and not much fuzz in the fan but it was to the point of being locked up so had to order it That is one PITA getting to it and...

Perfect ! Thank you.

Thank you ! I just couldn't figure out where that fan was located. I found that fan next to the switch just to the left and up a little in parts manual but it says it is 302K994360 PARTS FAN...

Thank you ! . Since the photo shows it to be just to the left of the main power switch I'm thinking the slide our fuser access door. So the fuser comes out and then remove the panels that cover...

Hi All,
I have a 3050ci with a C-6940 code. I updated the firmware and that didn’t help so I am in search of the IH fan motor Part # 302K994350, ***number just for reference I can order the...

Found my problem. It was a cracked gear in the drive assembly

Thanks, I will take a look at that next week. I ran all the motors in sim U30 and it never made a noise, just smooth running. It only does it when the sheet just starts to exit the exit assembly into...

\
Thanks for the input. Yes, I changed the entire exit assembly. The paper comes right out of the fuser and into the exit assembly and the exit assembly is made up of maybe 100 different parts,...

Hi all,
I have a Copystar 306ci that makes a machine gun type noise when the sheet starts to exit. This is 81/2 x 11 and it starts when maybe 1-2 inches has come out of the exit assembly and...

Well I found it..yay The machine was running TK-5197 toner. I turned the machine off, installed a TK-5199, turned it back on and there it is in the report. Turned it off, installed the TK-5197C...

Thanks for the tip. This didn't work either

Thanks RobertOB,
Yes I have tried the REID board and I am working with the hot line now. They are telling me it could be that I am using TK-5197 and not TK-5199 because it is a Copystar. I find...

Thanks, that was my first hope and it didn't help either...

Thanks, I really hate to do this but it may come down to this

Thanks, it is a brand new developer unit, I checked that and is working fine.

Thanks, I tried that and same thing. The Cyan didn't show up on the reports

Thanks, I tried 906 but it didn't help either. I wish I could back away too lol

Thanks, the drum is turning. It prints blue perfectly it just doesn't show up in the reports

Yes OEM toner, tried 2 of them and still didn't work

Hi all.
I'm having an issue with CS 306ci cyan toner not showing up on the status report or in the Command Center. Updated the firmware and tried a new cartridge. Tried a new developer unit and...

Thanks, Sorry, I guess I wasn't clear, per copy charge.

I will base it on
Level 1 Setting: 2% for each color (C/M/Y), for a total of 6%coverage.
Level 2 Setting: 5% for each color (C/M/Y)...

Hello Everyone,

I was wondering does anybody have any suggestions on what to charge for Kyocera's 3 tier billing. Also we give 500 color copies per month and they pay the overage.. Any...

Welcome !

Hello everyone,
I'm new to this site but not new to the business. I have destroyed my shirts since 1979 and I want to thank everyone for all their input. It helps even an Old-Tech with...