The Ricoh Belgium specialists have been to the machine four times and do not find the problem themselves. Work for Ricoh for 45 years and I think I have more experience than anyone.
But thanks for...
Type: Posts; User: info@digitaalprint.be
The Ricoh Belgium specialists have been to the machine four times and do not find the problem themselves. Work for Ricoh for 45 years and I think I have more experience than anyone.
But thanks for...
All jams happen in the decurler. Have already adjusted this in all ways and fully checked. I only have it with 80 gr paper.
Hey,
I have a lot of paper jams through the decurler in an MPC651. Someone a solution?
Thanks,
Patrick
That is precisely the problem. I am an old Ricoh technician who started his own business. And have two PRO C651. I would replace it with a 9002, but postponed this for another year. Ricoh has now...
Can someone please send me all the modifications of the MP C651 / 751?
have a lot of problems with paper jams on paper 80 gr. Thik paper is ok.
Thanks,
Patrick
The first series of PRO C651 CANNOT print without Fiery. It is only from a year after the first production that it is possible via PCL
Wire from the toner pump was short-circuited with the mass.
Everything changed with a machine that works and no results. Thanks anyway.
Patrick
Machine has gone on standby during a run.
She stays that way. no further response from the machine.
All power boards replaced and no result.
Anyone have an idea? thanks
Patrick
a set idiots:D:D:D
:o:oThe stacker was corrupt. Machine also said that the toner was not properly placed + code sc719-3 and sc719-7.All because of the stacker that was corrupt. just so you know.Thank you...
I have the service manual, but I can not believe that the print is broken. I do not believe in coincidence. Must be a stupidity. Maybe someone had the same error ...
Can someone tell me what to do with code C719-3.
Machine has just moved but has made copies.
Thanks
Patrick:confused::confused::confused:
My English is not so good. Sorry about that. I can if you want to reply in French and Spanish. Maybe you can give me answers in Dutch; French ore Spanish? The reset of the cleaning belt you do not...
Yes, it is necessary if you upgrade to firmware 6:05. The small board next to the large is enough. Does not cost much.
Colleagues problem is solved. The firm wire was upgraded to 6:05. With this version you need to replace the BCU board. You need BCU from the PRO 906 EX. D101 5220 - PCB: BCU: ass'y (Model C3.5) and...
The problem is before the fixing unit. I changed the unit with two other units, and the problem is the same.:confused:
Have two MP 9000 in the field and either runs the . Someone a clue. The firmware version 6:05.
thanks
Patrick :confused:
Dear Friends, colleagues, it was the pump unit B234 3260. See pictures.3421434215
Otherwise I would ask no advice here. On other machines i already had SC 495.....
Believe me, I saw everything after. Not once, but certainly 10 times. I changed the wheel plate already. Each engine works.
And, yes, the sensor is connected
Patrick
I did that. changing toner bank; hopper; pump ...... Still SC 495
All engines work and replaced the developer
Pulled out the toner bank......not the "couch. Sorry
I pulled the couch out there to check everything and to clean. Put back the bank and if I 5804-38 and 39 together do then rotate the spring.
Took out the engine of the toner from a working machine...