Hello There
This machine does one copy then shows an error code 59.00.Fo. I have cleaned and checked the transfer belt. changed the fuser with a known good one, and cleaned the contacts on the...
Type: Posts; User: Fuzzylogic
Hello There
This machine does one copy then shows an error code 59.00.Fo. I have cleaned and checked the transfer belt. changed the fuser with a known good one, and cleaned the contacts on the...
Hello There
My client has 4 x Mac's printing to the KM C280 and all has been O.K until today. Now when they try to print a "screenshot" from the Mac, the display on the Konica goes blank then the...
Hello All
The touch panel on this machine was not working properly. If you touched the Copy icon it would take forever to respond, and sometimes didn't do anything. If you tried to touch any other...
Hello Everyone
My client has acquired this Ricoh MPC4503 with a Fiery Rip installed. The plan was for me to remove the Fiery and plug it in directly to their network as they have no need for such...
Thanks for the info. I have tried, #,1 and 3 and it did not do anything, but, I will look at the ethernet card.
Regards Fuzzy:)
Hello All
Does anyone have firmware for this machine. I know that it is an "oldie" but the owner loves it.
The machine is stuck on "please wait" and will not come to the ready state. Iwas going...
Hello There. I would like some firmware for a Toshiba es167. Can you help me please.
Regards
Kim
Hello There
I would like firmware for a oldie please. It is a Toshiba es167. The display is stuck on "please wait" and I was going to try to reinstall some firmware to start with.
Regards
Kim
Hello Everyone
This machine has "scanner failure" on the display. I checked the error log and it shows errors 30.03.45 and 30.03.23. I have updated the firmware......no change. When It does scan...
Hello Everyone
I was called out to this machine. It had an error 120.01 (fuser lower re drive motor) After turning it off an back on it came up with another error 121.04 (heat belt overheat...
Hello Again Everyone
I would like to know if somebody has Movie Data for a Konica C364e please. I have come across a machine that has had it removed (possibly by a HDD clear) and it is just...
Hello Again
This is another KM 224e that fails to wake up after entering sleep mode. I have adjusted it's sleep mode settings but it just won't play along. Does anyone have the latest firmware to...
Thanks for the info Paul.The problem this machine has is in the "fuser pressure roller" area. The fuser itself seems to drive O. K. Is this bearing you are talking about in the "pressure roller "area...
I previously posted this problem under the machine model Xerox DC 900 (Asia Pacific). I am posting it under the European equivalent Xerox 4112-4127
This machine will print a few pages then it...
Hello Again
This machine will print a few pages then it makes a "clunk" noise. From then on the pages output are not fusing properly.
If I open the machine up the fuser pressure roller has...
Thanks very much for the link Don. I installed the movie data and all is O.K...............I am now waiting for the next disaster to happen:eek:
Regards
Fuzzylogic:cool:
Thanks very much for the link. I will install it and let you know how it goes.
Regards
Fuzzylogic:cool:
Thanks Woxner
Bugger,.............................. is there any chance that you may know where to acquire this movie data as the machine seems to be O.K. with the new firmware but it now says...
Thanks very much for the link. Does that Firmware have the "movie data" included?
Regards
Fuzzylogic:o
Hello Fellow Technicians
This C284 takes too long to process a print job. It sits there and blinks away for ages then only prints part of a job. I would like to install the latest firmware to...
Hello Again
I have a Konica C224 that stalls when a certain type of print job is sent. The client says that it is only when a PDF document is sent, however it worked for me after clearing the HDD....
Hello Again
Does anyone have the latest firmware for a Ricoh MPC 2550. I know that it is an older machine however my client has now upgraded to Windows 10 and cant scan to folder anymore.
All help...
Hello Again
I have a Toshiba es5055C and the HDD has failed again.Error F105 The machine has a total of 120k pages and is in a small office. I replaced the original HDD with a genuine 320GB ADI...
Hello out there
My client has bought a used KM C284 from the auctions. I installed it on their network and all is O.K.except that the administrator password has been changed. I have tried the usual...
Hello Again
This machine works fine for about 500 pages then it wont print the complete document, hangs, and needs to be rebooted. This is a continuing cycle and in the Machine Management List the...