sorry to say
better not to write on any thread
u r not help ful ,waisting ur time
Type: Posts; User: imran181070
sorry to say
better not to write on any thread
u r not help ful ,waisting ur time
if u know this machine well ,then u should never say so , HVT so easy to replace it has only 2 connectors
before replacing hvt we replaced drum & developer assy then we go frurther .
in...
problem is sir we cant see any image or PATCHES on ITB during printing or
initialising the machine ,how ever we replaced the transfer roller assy & ITB
dear all
please look at pic 1 when machine has issue only for BK, but after replacing HVT fm1-c996-000
became look at pic 2
job done
1 replaced both HVT for drum & develop biasing &...
thanks for reply sir
what i am looking for software side , not from hard ware side to replace NVRAMS & upload /download data /print or backup SMC
Regards
Dear all
we have issue of service mode cant enter due to sm1 from other contractor has changed 806182 to unknow
we requested from contractor , didnt refuse but also not informed
ANY SOLUTION...
i do have issue on printer stucked or freezes on hp logo
any 1 has idea please help
does any one have ,who can provide parts for canon vario print dp line 110/120/135
regards
yes reset the DC CON but b4 make a p print or make backup,
we solved same issue by clear the dc con
reggards
hi all
looking for NEW main controller for Ir Advance 6265
regards
hi all
i am looking for Main controller pcb1 NEW not used if sm1 has
i am willing to buy at once or if sm1 has idea to use cannibalized controller
i did tried but error E355 -004...
atl last i fixed the problem by only re seating main controller 1 & 2
AH
regards
no sir i m not END USER machine was working till end of day
next morning when ON the machine ,since then only pilot green light & standby light is
always ON ,customer has no knowledge about...
only pilot green light and Standby light is ON at startup no any movement
help is required
regards
not stacking ,thro 1 set on another top of set ,
dear all
help is required for 8105 finisher is not staking loose ,but with staples perfectly staking
replaced finisher controller & upgrade the firmware with latest
any help ll be appreciated...
hi all
i do have issue to on my note book cant setup 3D parts cataloge ,down load viewer and parts cataloge but viewer down load as temp.umi not as application
our friends has no issue
...
hi all
i do have issue to on my note book cant setup 3D parts cataloge ,down load viewer and parts cataloge but viewer down load as temp.umi not as application
our friends has no issue
...
have a machine irc 2550 it gave E602-001 put a new HDD cant format or put firm error
pls need instruction from any old copier expert
thanks