Updating the firmware resolved the problem ? Do you think is it a hardware issue or a software issue ? Any suggestions
Type: Posts; User: Alfons
Updating the firmware resolved the problem ? Do you think is it a hardware issue or a software issue ? Any suggestions
HI cscce,
Did you found a solution ? I have the exact problem and all the gears are ok. It is feeding the second page before finishing the first page and that goes to a jam.
Thanks !
HI , I have the same problem with a Canon MF8550. I saw that the registration roller is not rotating. The registration motor seems ok, has 2 x14 ohm. Maybe the motor drive is damaged ?
Do you...
Try to add in the list the P/N of your new HDD (not the serial number). I did this on a iR2200 some time ago. I changed the file " iR2200-XXxx0013-HDFormat.ift". Good luck !
Press STOP button for about 5 seconds.
Hi, did you fix it ? I have a Canon MF8550 (same machine basicaly) with the same problem and I suspect the registration motor.
the most important components you already have: the 3M hose and the 3M filter. If fit to any vaccum cleaner you get a powerfull stationery tool.
Perhaps the fluorescent lamp is "tired" . Check if the scanning lamp has dark edges. The only solutions is to change the lamp wih another one from a small notebook
Try to clean LSU assy. the rotating mirror, the fixed mirror and all the lens, gently clean the plastic lens. Clean the contact of transfer roller. use conductive grease. Check "toner save" option....