Hi
Has anyone seen this type of Banding on cyan halftone print service mode 120 level
Have replaced Cyan iu and Transfer belt Machine has only just been installed so is new.
Cheers Justin
Type: Posts; User: Marsh2
Hi
Has anyone seen this type of Banding on cyan halftone print service mode 120 level
Have replaced Cyan iu and Transfer belt Machine has only just been installed so is new.
Cheers Justin
Hi
Yes you can replace just the glass layer (top layer) of the touch panel you will need to order it through you local KM dealer or repair centre.
This is usually the cause of no keyboard...
I am having trouble with a Bizhub 751 running pre print stock on A3 Bond stock. There seems to be a build up of a gooey sticky type substance that builds up on the transfer\sep charge wires and...
With account codes activated you had to had a valid account in the driver so it doesn't delete the job. If you look in the job history it will say job is deleted due to error this is the reason for...
Hi Again
I dont think i am explaining it very well i will attatch some examples of the colour changes. It is not the registration that is out and the IDC's(AIDC's) have been replaced with new...
Thanks guys
I have read all your remarks and maybe I need to clarify things more. This problem will only resolve with reset and stabilize does this occur on the normal operation of the machine or...
Thanks guys
I have read all your remarks and maybe I need to clarify things more. This problem will only resolve with reset and stabilize does this occur on the normal operation of the machine or...
Thanks for you help but firmware is up to date and the AIDC is the same sensor as IDC just an older version but thanks for your help. So still needing some help here please....!!!!
Hey There
I was wondering if any one can help me or has had this problem before. C452 the colour which it produces is always sliding away from an acceptable quality. If the customer preforms a...
Yes i agree the bypass looks nice and folds up and down but to use it then it nots going to make you life easy. The LCT is the only way to go and actually the larger dual paper trays are even better...
Just a matter of interest does Michael Jacksons body get buried or recycled he might make a pretty groovy C6500.
Since Fixed was Duplex Control Board if anyone else gets it. Funny it call a Paper Feed Drive motor not related to duplexer.
Hi
can anyone help me please i have a C0101 error code on a C6500 which refers to Paper Feed motor M41 which i have replaced but hasnt worked. It also only seems to happen on duplexing. Has...
I have had this problem on more than one C500/8050 but never C6500 but i replaced the roller, bearings and plastic outer sleeve on the others and never had it return so hopefully yours will be the...
Make sure he put in the right developer and maybe it could need new developer tank also.
Try cleaning the exit sensor of the folding unit in the finisher i think this shouold work
all Fiery software can be found from the www.efi.com website.
hi
sorry not that sure because KM never let any C350 into Australian market without harddrives or extra memory and they were supplied with a machine order free of charge. Just thought that maybe...
The paper sensor is set between two plastic plates which are held together by two push together luggs one on each end, try pushing these back together. You can get at them from underneath after...
Hi
I work on the C6500 and have had dealings with IC-304. The red's will never be as vivid as a Xerox because Konica Minolta place these CYMK Colour Gammitt promanately towards blue not Red like...