Thanks guys. Yes it does have a data security kit. We have many accounts with DSK installed. I'm unaware of how to enlarge it ? Also the customer says it used to come out ok.
Type: Posts; User: MarkyB
Thanks guys. Yes it does have a data security kit. We have many accounts with DSK installed. I'm unaware of how to enlarge it ? Also the customer says it used to come out ok.
If your referring to the HDD it had the standard that comes with the machine. Also the extended memory chips installed. I've the same set up at the shop and no like problems.
I have a MX-M453N that the internal prints are great and scans of documents also good. It's placed at a local CHP and they do alot of Photo ID's, drivers licenses that when scanned do not come out...
Good Morning Folks, Sorry I haven't got back to complete this thread sooner. What I have come across in the field is we have had 2 bad SCN-MFP boards bad out of the box, or shortly after placement....
Well, I tried a new HD out of the box and still an E7-03. I tried updating All Files from the Board with the dip switch in update mode and it writes like All is Well , but when you reboot the machine...
Thanks much for your response and knowledge. After I got back to the shop I got into the service manual and discovered where I was actually at. The machine came with a disk and has the security kit...
ok, I replaced the HD and got an E7-03. I'M NOT SURE IF THERE IS S SYSTEM FILE ON THE HD TO COMPLETE BOOT ? ONE THING THE NEW HD DID WAS LET ME INTO SIM MODE TO UPDATE ALL FIRMWARE AND CLEAR ALL...
we set up this machine new and delivered the other day. All worked fine. The IT people set up the network later. My problem is the display screen locks up when a command is issued. I unplugged the...
The fix was removing Laser Unit and thoroughly cleaning the slit glasses. Have a good day !
Happy Friday Folks. I have changed out the fuser, Transfer Belt Assembly and K-Imaging Unit and Transfer Roller. I'm taking a Laser unit next week, but am going to check the slit glasses for...
Greeting guys, it was the gear that fixed the problem on the TBU registration problem. Thanks Much !
I have a Color registration problem on this machine. It's been about 8yrs since I've seen this particular model. Looking in the Service manual it appears there is a jig to calibrate registration and...
I got it, thanks guys ! There is a back door to rewrite the current meter that was accidentally cleared in SIM 24-6 . Boss says I can't share. Thanks for the input.
Thank You !
It shows the same New Count there also. Thanks !
I have a Sharp MX-M453 that a tech cleared the Copy count in SIM-24-6. So now when the end user is called to get a copy count for billing, under System Settings/Total Count/Job Count, the count...
Ok, for this fix, I set the Ethernet speed to 10/100mbs duplex. The Switch wasn't powered, but was a 1Gig speed switch. The data was hitting the Nic so fast it froze up the Copier and also caused...
Thank you All for your responses to this issue. The IT that is onsite for this machine has been difficult to work with and is convinced it's the Copier. I can ping and print from my Laptop with NO...
Good morning Gentlemen, I used a laptop to check out this machine and it worked fine for Print, Scan. I did a continuous ping and the Copier never went down or froze as it did while on the network....
Thank all of you guys for your input. This has been a real lesson. As soon as it's resolved I'll post. Thanks again.
Thank you kindly men.
I'll state again, the machine unplugged from the network works GREAT ! When plugged in and a DATA PACKET hits the NIC it will cycle off power then back on again in intervals of about every minute....
The initial call was the machine was froze up, not responding at the control panel. I unplugged fax and CAT5, rebooted the copier and it worked fine as a stand alone. I went into admin network...
Hello Allan, No I have not tried changing the NIC to DHCP. It's in a State of California Office and their IT did ping it continuously which caused the machine to power down then on again. What do you...
Good morning gentlemen. I have a Bizhub C360 that the NIC card when continuously pinged will cause the Copier to cycle power on & off. It also looses the IP and goes back to the generic...