TX log shows Date/Time/ and number of Pages just fine. It's just the TX REPORT that's giving them fits.
It's at a Law firm... so they need the data on the report.
Type: Posts; User: guitar9199
TX log shows Date/Time/ and number of Pages just fine. It's just the TX REPORT that's giving them fits.
It's at a Law firm... so they need the data on the report.
Posted this in the regular Canon forum as well, but have not received any replies. Will try here too.
Good morning troops!!
I have a customer with an older iR3325 that has Fax TX reports turned...
Good morning troops!!
I have a customer with an older iR3325 that has Fax TX reports on... and when the report prints out, all the TX data comes out as "zero". They need time/date/number of pages...
Keep in mind you're dealing with an 11 year old series of machine. I'm willing to bet that the "Energy Save" feature isn't quite as efficient as something that's 2-4 years old.
Unless it's got...
I'm getting an F2-40 (BK Toner Density Error), but it's misleading because at startup, I hear a very loud clicking noise from the Toner Hopper. I cheated the fr0nt door and ran SIM-25-1 with the...
Hey troops...
I need an assist. I've got an MX-B402SC that I need to replace the Toner Supply Motor, but the Sharp parts guide reads like IKEA instructions, and I can't find it anywhere. Can...
I've used these a BUNCH of times for customers wanting wireless printing. Just set it up to connect to the wireless network, connect a Cat-5 cable to the port on the unit, and then set the copier up...
Hey troops... I have an odd one.
I have a customer with and iR Adv C350 they're primarily using for faxing (Medical facility). Instead of printing out faxes, they use fax forwarding to a folder on...
By "Parallel Toner" do you mean "Compatible"? If so, your image quality will suffer a bit. OEM toners will give you better looking prints.
Almost sounds to me like they're using a PostScript driver to print to a machine that doesn't have PostScript installed. Try using the PCL6 driver and see if that changes things.
Check your printer driver. Make sure you're using the PCL driver (Windows). If you have a Mac/Linux PC, be sure the machine has PostScript installed, otherwise you won't be able to print. Start with...
It's a long shot, but check the network TYPE on the wireless network. If it's set as a "Public" network, File and Printer Sharing are disabled by default. Set it to "Private", reboot and try again. ...
Some of the parts in the iR Adv C2230 will cross over...but not all of them.
The Ricoh was using the same IP address, but I installed the correct Ricoh drivers.
Quick update to my dilemma.
Updated the firmware to newest/latest/greatest with no change. Also disabled all other print protocols, but nothing stopped those jobs. I decided to test a working...
Morning troops,
Don't know if this has been asked/answered yet or not, but I have a customer with a 307ci in one of those "Mixed Use" office complexes, that every so often will print out a bunch...
Any errors in the 600's are usually controller/memory/HDD related. My first suggestion would be to re-seat all the connectors on the main controller, and then try rebooting.
If that doesn't change...
That's some pretty good "MacGuyvering" right there....
(Is that even a word??....)
Good idea to get yourself a circuit tester, and look for excess load, line voltage drop, etc. If there's other appliances on the same circuit, that can cause issues as well.
I didn't see anything...
Mac OS hasn't supported true SMB since OS X 10.6 I think. They can be set up using FTP though.
There IS a workaround for scanning SMB on a Mac, but it's really convoluted... and gets into some...
AZ240323 (NA/TWN)AC POWER SUPPLY PCB8)
D0BQ5184 (NA/TWN):AC CONTROL BOARD PCB9)
Hope this helps!
Reason being, the line is a "VOICE" over IP line. They're notorious for having gaps and breaks in the signal, most likely due from the conversion from Analog to Digital, then back to Analog. The...
Thanks gang... your kind words mean a lot to me.
I used to work for Bob, at the time he owned a concert sound company, music store and recording studio. Through him I was honored to meet several...
It saddens me to let everyone here know we've lost a member. Bob Cap, one of my dearest friends in the world for 40 years, lost his battle with cancer last week. He wasn't a very active member of...
I've got several model versions of Canon iR Adv firmware, but I need to be sure I've got the correct version for an iR Adv 6555i machine. Can someone please let me know which other models are in that...