Hi, I have a problem with mpc2004ex and mpc3004ex. On both devices there is sc-672-00 code. I changed control panel, usb cable and I also removed hdd but the problem is still there. Any solutions?
Type: Posts; User: tavorh
Hi, I have a problem with mpc2004ex and mpc3004ex. On both devices there is sc-672-00 code. I changed control panel, usb cable and I also removed hdd but the problem is still there. Any solutions?
Hello!
I have a problem with mpc4504, when I try to copy or print the device just report printing:1min and the job is not realized.
Anybody have any suggestion?
Not yet, I also installed an old laser. The customer only prints in black, wich is ok for now.
I replaced the laser unit and ITB unit, also I did process: ''Ricoh MP C3300, info after Engine reset''
I have a similar problem, anyone have a solution or suggest?
Hello,
I have a problem with machine Mpc3504, because it keeps showing me that there is a problem with a code sc672-00.
Do you have any suggestion on how to fix this problem?
Yes,everything looks ok, when copying,scanning and also without SC code. The machine has also the latest firmware.
Hi!
I bought mpc5504 last week. I notice that in the lower corner scanner up about 50mm, until the machines goes into sleep mode.
Thanks in advance.
Is the duplex unit (door) from mpc2800/3300 the same like from mpc4000/5000? Can I switch betwen them?
IŽd like to get it too, please:
roman.hrovat07@gmail.com
Hello everyone, I have a problem with the mpc3000 machine.
The machine makes the paper wrapped when it comes out, so it makes it look like it's wet. I have tried more different types of quality...
Hello,
I have a problem with finisher sr3110 when I do booklet A3 with only one paper without any clips (staple)- the paper is just folded.
This paper is deformed in the second phase before...
Hi,
I would try it also. My email: info@elektronika-hrovat.si
Thank you
I have similar issue with mpc4502. Copy is ok, but print is very bad. Driver is PCL6.
Regards,
Roman
Hi,
I have many used toners, but they are not completely empty. I would like to open them and put all color in one or two, but I do not know how to do that. Anyone knows?
Thank you,
Roman
Hi,
I have a jam 3-014C-1-02. I think the problem ist with pick up roller, but they did just 6000 prints.How can I turn pick up roller to change it?
I have finisher SR3020. This Picture is just with one A3 paper(booklet).
35495
Hi,
I have a problem with finisher when I am doing staple copy or print on ricoh mpc4000 machine. Finisher does not push paper enaugh strong out and papers start to twist. Any suggestion what to do?
Maybe you know which sensor is this on sr3110?
i've problem with machine mpc4502. Offten machine shows jam and then sc720-081, conect the finisher SR3110. Anyone had this case?
I have the same problem (sc 720-81). Which sensor do I have to check in finisher sr 3110?
Thenks. I'll check it, bat when i print 1200x1200 don't have any problems.
It makes grey vertical stripes in the background. Test print(1103) is perfect.
Hello,
i have a problem with slight striped gray background, but test print (1103) is OK. Lines are stronger in full color print or copy. Sometimes gray lines almost already (are not visible), but...