The controller employs GW (Grand Workware) architecture that allows the board to control all applications, including copier, printer, scanner, and fax applications. To add the optional printer,...
Type: Posts; User: Nikolay
The controller employs GW (Grand Workware) architecture that allows the board to control all applications, including copier, printer, scanner, and fax applications. To add the optional printer,...
You must update the FW: System 1.08 (D2625221H), CheetahSystem 1.08 (d2621530H) or later
Service Mode
In general, it works, but you can only believe a total counter, tested on several models (spc250sf, mp2501sp, mp2014).
If you could send it to me i would be happy to test it. support@ricoh.spb.ru
Use
5-985-001 to 1
5-898-001 to 0
5-193-001 to 0
If you know how to update it, then send a request to my email and I will help
It is necessary to update the Network Support to version 7.38 this should solve the problem. Attached patch description.
???? Also send counter every month ...
See File
FW Update Error Clear
1. Press (“Clear Modes / Yellow”, “1”, “4”, “3” key) on the
operation panel when the error codes appear.
2. Press (“Clear-Stop / Red” key) three times.
3. Once the error is...
That description of the error
SC995 D CPM setting error CTL
01
Defective BCU
NVRAM Replacement error
Install the previous NVRAM.
Input the serial number with SP5-811-004, and turn the...
Setting in Attachments
In the Administrator menu, it is necessary to ensure that access is not prohibited. The access code can be changed earlier.
There are three phases in the operation of the proximity sensor:• First, the sensor detects the presence of the operator within the arc in front of the machine, and then
signals the machine to...