Thanks for your suggestions guys, Cipher nailed it, this one was serviced before and it was missing the metal spacer between the retainer clip and the bushing, put a brand new one and its been...
Type: Posts; User: LTTP
Thanks for your suggestions guys, Cipher nailed it, this one was serviced before and it was missing the metal spacer between the retainer clip and the bushing, put a brand new one and its been...
Yes its a 3rd aprty replacement, however, the very first time we serviced this machine we put OEM bushing and retainers, then after it broke the first time, i decided to use this 3rd party one...
Hi, this machine has broken two sets of bushing and retainer in the last 3 months, originally we just replaced the heating roller and put brand new sets of bushings and retainers and now this is the...
Hi, im having an unusual problem with this machine, client reports it freezes 2 or 3 times a day and the only way to make it work again is by a power cycle, then it works just fine for couple hours...
Correct, if theres no paper on trays 2,3 and 4 mac hine works perfectly, tray 1 doesnt have the jam problem. So could it be a faulty solenoid? theres one for each tray i believe.
I have a weird problem with this machine, everytime i turn it on it always picksup one sheet from the tray and throws a jam error, after i remove it, it works perfectly until i turn it off and on...
you mean the white hook that looks like a jaw on the side of the fuser? if i push it to the ¨locked¨ position manually and then close and open the door, it disengages, also the clip on the door...
Replaced the film on clients machine, and then tried with our fuser which is printing fine on our machine. Ita not as much as trying to save costs as it is only replacing whats actually broken, i...
So, one of these machines is presenting a printing problem i cant seem to resolve yet, attached images show the error, NISSAN one is the bad one, the Ofice Depot one is how that same fuser prints on...
Sorry for the late reply ive been busy with other machines, but 2 days ago i finally had the time to work on this one. Error codes are different, sensors PS9, PS17, PS4A, PS13, PS10 give me delay ...
Hi, Canon IR 3035 on standby for around 4 months, client tells me she stopped using the machine because it was jamming a lot in the fuser area, after checking the fixing unit i can see fixing film is...
So, client had a machine unusedfor several months and after configuring, cleaning and checking everything, the only problem im noticing is that aprox. 1 in every 100 copies jams just above the fuser...
Just reset password on service mode, it worked.
didnt know about that data erease killswitch, better not to mess around with it, thanks for the tip.
So... client wants me to get hismachine working again after several months on standby.
First thing i noticed is the machine has an admin password thats not the default factory one, so im wondering...
Well customer is actually my boss LOL so he doesnt want to buy orginal toner, i had a hard time convincing him to buy new compatble ones so...
Anyways thank you guys for your input, ill try to...
Hi, im having troubles fixing one of these machines, problem is about 2 months old and im absolutely sick of it.
This is what ive done so far to try to fix this problem.
1- At first we thought...
IS there a way to check the toner cartridge levels on this machine? client called for bad prints but it seems to be a low toner problem, i want to just rule out that possibility.
transfer roiller looks good to me, i have experience remanufacturing toner cartridges so i know how a bad magnetic roller looks like, im confident thats not the issue, machine had a LOT of toner...
Went to site yesterday and after polishing the drum unit prints quality improved but still theres a white band on the left side of the page, attached a scan of an internal print.
Dev roller looks...
no dev assy test yet, ill scan a print and upload it.
EDIT: not sure if this pic shows the issue, but is just a really dim print in both copies and prints, and toner bootlñe is brand new.
On...
Client called to fix light printing on his machine, we replaced toner bootle and drum unit but still prints are dim.
I can see the bottle is spinning so its actuallyh feeding toner to the machine...
swapped the heating unit from another fuser and it works just fine.
Anyone tried to fix this issue by replacement the part that goes bad? attached is whats inside the heating unit, alli see is a...
Ok got it, you guys mean the full heating unit, it looks fine nothing charred or dirty, cleaned the sensors/thermistors inside the heater housing but still E000.
Il take the full heater from the...
So the ACTUAL FILM works also as a thermistor? i didnt know that, anjyways ill open the unit and clean everything inside
We have a machine throwing this error at boot E000000-0001, i tested with another two different fuser units and both worked OK, prints and works just fine, and as soon as i put back the original...