Hi! I have got my hands on a pelemann flat bed foil printer. I downloaded the latest version 1.2.0.0 of the software. I was required a firmware update. I ran the update. Now the image is distorted...
Type: Posts; User: Cmp4you
Hi! I have got my hands on a pelemann flat bed foil printer. I downloaded the latest version 1.2.0.0 of the software. I was required a firmware update. I ran the update. Now the image is distorted...
Thank you for the explanation! Now I know what procedure you are talking about. I can see the reference and the steps in the service manual!
But I have noticed today, that there were no issues with...
PVCONT-Y/M/C/K is at -1000V. Is this normal? Default value should be at 20-120V.
Could you specify DPC for drums & tdc adjustments? Which service mode should I look up? My service manual is in another language and it is difficult to translate the terms..
Thank you for your time!
Oh, 7% isn't too much...the issue is, that the room where the machine is located at is really huge (hard to change hum. levels) and the machine is standing there for 10 years now. Don't really know,...
I have tried b/w prints. First page is good, 10th page is bad. Dots on the paper are black. I checked the humidity: 18 °C ; 13% rel. Hum. ; 1.8-2g/m³ Abs. Hum. --> 13% seems really low for humidity...
I have checked the counters on drums and devs. All under 20%, so relatively new.
I have not replaced the drums yet. The colors involved are magenta (worst), cyan, black. How can this happen with all drums at once? Can this be static that attracts the toner? This issue occured...
An older imagerunner C9060 pro has a lot of toner particles on the background of the paper. Corona and toner collection tray have been cleaned.
The amount of particles increases with increased page...
Hello guys! :)
I did some more testing today and found a weird behaviour, which explains the streaks on the paper.
I inserted the cut sheet as "roll paper" by accident and saw, that the head...
The handle is down :). No worries.
I think I have narrowed down the issue. I did the gap calibration, which had no influence, the carriage unit still strikes the paper in the middle and at the...
Hello Phil,
I think I have narrowed down the issue. I did the gap calibration, which had no influence, the carriage unit still strikes the paper in the middle and at the beginning. I then changed...
Thanks for your response ).
I will try to follow the steps of cleaning, when I get my hands on the service manual for the machine.
Here is a video of the carriage unit hitting the platen on...
Thanks for your response :)).
I have seen that cleaning under the carriage requires a lot of disassembling...
I will try to clean the carriage unit with a cotton swab.
I have uploaded a video...
Hello! :)
I would kindly request a service manual for the Canon ipf8300. Preferably in german or english.
Thank you very much!
Sincerely Marcel
Thank you for your answer! The ink is genuine. May take a look at my other reply! :)
Sincerely Marcel
Thank you for your kind answer! I will gladly answer all of the questions and give detailed info!
45049
- the pdf contains images and counters from the machine
- Machine has 20.000m²
-...
An ipf8300 is creating smears on the right edge of the paper when scanning the paper. It looks like ink drops and not like head streaks. How can this be resolved?
45042
Problem is fixed. In the image below you can see my red circle around the cam. The cam was out of place on both sides of the ITB.
The pusher was also out of place, so the cam couldn't lock itself...
Hi!
I currently have an E074-0001 on a Canon IR ADV C9060 pro. It occured, when the black developer unit was reviewed due to stripes on prints.
The ITB was left untouched. But I noticed that M5...
Problem resolved by adjusting the paper width of the multi deck.
COPIER -> FUNCTION -> CST
MDK1-A4 -> "OK"
MDK2-A4 -> "OK"
MDK3-A4 -> "OK"
COPIER -> ADJUST -> CST-ADJ (compare values...
We can't print from the Multi-Drawer Paper Deck-A1. The Fiery command workstation (Imagepass A1) wants to print from paper tray 3 (main machine) and not from the paper deck. Print won't come out....
Well I think it might have worked. As of now, I don't see any more white streaks when printing black. I went into S2 -> misc p -> ex-spit ->ok and then printed 16 sheets A4. On the first one the...
Yeah, thought of that too. I did some cleanings (dev menu) some weeks ago where there has been the same problem and those lines were gone. Hmm.
Hey guys,
since 2 days our Imagerunner Adv-C9060 pro is printing white streaks every 5 mm in the middle of the document when there is black.
Is it possible to fix it by one of the cleaning...