Is this how to disengage it?
6.12.5 GAPADJUSTMENTBETWEENPAPERPICK-OFFPLATEAND PRESSURE CYLINDER
PURPOSE: Toensuresmoothpaperfeedtothepaperdeliveryunit
1.7~2.5 mm
...
Type: Posts; User: khobo1
Is this how to disengage it?
6.12.5 GAPADJUSTMENTBETWEENPAPERPICK-OFFPLATEAND PRESSURE CYLINDER
PURPOSE: Toensuresmoothpaperfeedtothepaperdeliveryunit
1.7~2.5 mm
...
yeah so i cleaned the pressure roller REALLY good.. but i could only access one side of it... and i don't think it helped much. is there a way to disengage the roller and get it to spin freely...
see the light/dark banding?
Can i use rubber rejuvenate on the pressure cylinder? Is there anyway to spin it while in the machine? or should i just wipe what i can access and be done with it?
ended up being that those 2 ink sensor pins had been gunked up... poked around with them with a qtip to clean them off.. hopefully didn't bend anything they're really thin
i also changed the ink...
i'm thinking maybe since it had been sitting around for 5 years that some ink clogged the sensor....
it doesnt' give me a no ink warning even though the drum is empty.
it didn't just stop...
Was flushing drum because it had been sitting around... pages suddenly went blank and master is dry.
i noticed a whining as well
using expired ink i'm guessing is the cause?
Please tell me...
just for the record it was actually the cable length. I had too long of a cable. needs 6 footer max
Hey,
I actually have a JP8000 as well but with an embedded card the uc5e. could you tell me what's going on with your system? did you get it resolved? i bought an older computer for this thing a...
ZipRIP Products & Support
came embedded with a standard SD-630
I hit the two test buttons on the back. it resets fine. I hit the test button and it prints out a test sheet totally perfect.
...
that's amazing.. i'm looking for yellow as well but i have a Ricoh/standard machine jp8000 / SD630
any ideas for ink replacement in those? the ink is much more gooey but i can find the yellow in...
hey frank, if it works anything like my standard SD630 it's more of a long bar clamp that holds the master onto the drum unit. you can clean the inside of the pinching mech with a very damp cloth and...
do a youtube!!!! I'm brand new to duplication and everyones just laughing at me that i purchased a unit. seems like a dying art and i'd love to know how to maintain.
plus the information would be...
also, most of the techs i've spoken to have been skeptical that i even bought this unit. I feel like i got a good deal on it. 600dpi, pc parallel port and came with cabinet, 4 drums, 3 drum cases,...
questions for UV duplicator ink alternatives
i just took the delve into duplicators and found a really good deal on an SD630. 300 masters around 100k prints -- practically brand new.
I knew that...