Thanks George , yes this what i beleive so
Type: Posts; User: issahodeh
Thanks George , yes this what i beleive so
The machine keeps dropping toner on the transfer ubit so its show up on the copy , I replaced the developer, but no luck
Please advice
Does any one knows what is the part number for
G- Belts at the Master Removal Section
( G- Belts on Vertical Transport Roller - Up . And Vertical Transport Roller -Down )also I'm ready to by them
Does any one knows what is the part number for
G- Belts at the Master Removal Section
( G- Belts on Vertical Transport Roller - Up . And Vertical Transport Roller -Down )also I'm ready to by them....
Does anyone has any more informayion
the manual said :
401 C Transfer roller leak detected
A transfer roller current leak signal is
detected.
• High voltage supply board defective
•...
The Panasonic KX-F 130 after the power ON the display shows the clock then nothing but the sign - is blinking, also if I try to make copy the original doesn’t feed in.
Please advice
the black print is too light the toner sign on LCD is shows full.I replaced the toner cartidge no change.
please advice
Thanks ZOOTECH
But it didn't work I think a step is missing or its wrong way
If u can find anything that will be great
anyway thanks for u & for anyone can help
yes Zoo tech that what I'm asking for can u please tell me how to do it
the reports print out is okay but if I send or copy maybe its need celebration !!!
Hi
Please help with this fax machine the thermal head is clean and the scanner as well I open it and clean the scanner from inside. but the problem still same black copy as well as when if I send a...
Many Thanks to all guys
I checked the volt its goes down around 10 - 15 V les the user useing the same connector for the Pc and the machine and ( heater )
I'll try to change the machine place...
The machine each month shows the Sc 541-542- 546
The thermostat is okay I keep replacing the 2 Thermistor .but the problem comes again some times after 2 hours or next day.
Please advice
I've Riso cr 1630 it display E 20 it means ( Paper Eject Motor Lock) what does taht mean .please advice urgent
many thanks for all of you
Please advice with : what the service adjustment codes that has to be done after replacing the ( Drum , Developer) for Konica 2223 . please in steps
Thanks
Hi
The MP 5500 at morning after its tured on and pressing the start bottom its feed the paper its display the sc code 220 and paper jamed before the registrations rollers.
but after removed the...
Hi
I have the Konica 2223 service manual,but without chapter 6. can anyone helpwith this
thanks
yes i tested the toner bottle is turning ,and the toner goes ti the development unit if I keep open and close the front door the development become full of toner .
I have Gestetner DSM 645 - Ricoh Aficio 2045e the machine gave the toner End sign .I did the follwing;
Replace the ID sensor ,Developer,TD sensor.
but no luck .
the reading at the Sp mode 3001_001...
I have many of this model most of them are the same the Sc 542 just at the morning but after the user clear it by C 107 C sp On/Off. the machines works allthe day with no problem just at the morning....
6.5 DRUM UNIT
6.5.1 DRUM UNIT REMOVAL AND DRUM REPLACEMENT
1. Take out the development unit. (Refer to Development Unit Removal.)
2. Lower the transfer belt unit.
3. Take out the drum unit by...