Search:

Hi
First check the job log logs if they are at 60k and delete them.
If they weren't at 50-60k, then create a backup and install a new hard drive (500GB), costs €25 and you have peace of mind

Hi
Just to understand: The error occurs after you have replaced the drum, MK kit or before? Drum unit changed completely or as individual parts? The error says that he cannot calibrate BK. Try...

Hello

The same for me. More than 200 devices from the CR4/CR4.5 series are available to customers and not one has changed the developer. The last developer I changed was on an MX-3640N more than 5...

Hi

FW 03.01.M1.00 or higher

Hi

26-61 coverage counter ?

Hi
All transport locks removed? All units (drums + developer) removed and reinstalled?
Which firmware version was originally on it? From version 03.20. There is an installation wizard that MUST be...

I will retire in 10 years and will then receive around €1,700 each month + health insurance. But you also pay into the “big fund” every month since you start working. Currently 9.3% of your gross...

Hi

Is the scan folder shared?
Sharing - Advanced Sharing - Permissions ??

Hi
For a third-party product (folding machine), we need feed rollers that look similar to the original feed of the DF-700. Part number 303JX07330. Does anyone have the dimensions of the feed...

Hi
For a third-party product (folding machine), we need feed rollers that look similar to the original feed of the DF-700. Part number 303JX07330. Does anyone have the dimensions of the feed...

Is Trump a communist??
How much money did he get from his buddy Putin to boycott the latest arms and money shipments? In my opinion he is not only absolutely stupid, but apparently also for sale!!...

Hi

Order rejected, scanner not available.
With the device you can print without any problems, when scanning it shows the above on the display, it also starts the scanning process, but 7cm of the...

Settings, Print, Job Accounting, Accounting Log Frequency

Yes, that's the way with the MX-B467P.
But job accounting is missing on the MX-B427W...

Hi

a question for the experts:
Can't you have a meter reading transmitted on an MX-B427W? It works with the MX-B467P. The settings are missing from the menu on the 427W?

Hi

New TI from Sharp Germany

KMM appendix
Number: 6215 Date: 22-1-2024
Model: MX-2651 - MX-6071S
The colors are z. T. not printed flat.
The cause was a defective PTC Corona holder.
This...

Hi

July 2023 from me to Sharp Germany:
We got 2 new Sharp BP-70C45s yesterday.
Both devices caused streaks across the direction of travel when copying/printing. In both cases there were 4...

Hi

Error U2-74 indicates a problem with firmware recovery and can be reset by the operator by acknowledging (OK) the error display.

On devices that are not switched off overnight, the device...

Hi

NBRGP1066FCZZ is the number of the plain bearing

Hello
Yes, this is the version that was made available to me via drop box from Sharp

Hi

Sharp sent us a new fuser unit in exchange to look at ours. And there is a new firmware that cannot officially be accessed on the Sharp server yet. Unusual

Hi

Just had the error this week. Drove there, installed the latest firmware with a USB stick, restarted the device and the customer was happy. Please stop ordering or changing circuit boards all...

Hello

First try a new SD card.
If no change then, new hard drive.

Hello
We have more than 25 pieces of MX-B467P available to one customer. Now, after about 20,000 pages, toner spots appear on the edges of the first one. They can be removed, but that's not the...

Hi
From your text it is not possible to see what you have already done yourself, cleaned or checked. How old are the parts that are installed? With the information provided here, it is not possible...

Hi
if the transfer belt isn't cleaned, it probably can't be the heater. Have you cleaned the drum blades?? What color are they? When they're good, they're almost transparent. If they are yellow or...