Dear friend,
you have problem in main ..
i have many machines with these problem (Contracts with Banks) .. some capactior failed..
Type: Posts; User: sakisvas
Dear friend,
you have problem in main ..
i have many machines with these problem (Contracts with Banks) .. some capactior failed..
can anyone help me with the firmware?
thanks
can you send me please a firmware for update with usb please?
i have this file : bizhub_C35_EngineFW_v50G0-0200-00.zip
it is correct for usb update ?
Dear friends ,
my customer has a bizhub c35, the problem is tha the machine work fine as printer but when i go to copy the machine freez ..
In the control panel write ready for copy ......
Dear friends
I have a customer typographer with TOSHIBA studio 5506AC, when he print solid color has lines parallel in feeding direction .. (test mode 04-237 in all colors have lines)
The...
ok
do you believe that i can not fix the problem with some adjustments? the problem is OPC?
I used D1589640 Developer.. Is it OK?
Thank you.
Thank you.. I will install original drum..
But I have use
Katun drum in other ricoh mp2501 without problems.. Why??
No the drum is KATUN!!
Thank you
Dear friends,
I have a customer with a Ricoh MP2501 SP with black lines in copies (The machine need PM).
So i change DRUM, DRUM BLADE, CHARGER ROLLER and DEVELOPER ... (sp2801-001)
After...
Thank you, i will replace the grids .
The fuser is ok... I stop the paper before the fuser and the image has lines..
I have clean all main chargers ,grids and laser slit glass... I put the yellow charger unit in black drum for test, but the problem not solved.. I do not replace the charge grid..
thank you
Dear friends,
I have a problem with a e-studio 5506AC. i have lines in printing , in all image units cmyk ... i print with 04- 237 and the lines are for all colors in the same point.... I have...
Dear all,
i have Panasonic Dp8060 with problem in Laser Unit...
Where i can find used laser unit... ??
thanks
Hello, i need service manual for XEROX WC7232, please!!
Hello , I need a service manual for XEROX wc7232 please!!
can you upload a photo of a copy?
hello, have you solve the problem?
Press *+1+3 and open the machine..
Vincent, Have you solve the problem?
Check if the SYS board cooling fan is rotating... if yes update the firmware .
remove th black mylar of main chargers Y, M, C and K.
if the problem occurs then:
(1) Changing the offset amount of the 1st transfer bias
Reduce the offset level by 20% so that the influence of...
ok ,
do you have the BSI No. G16F433 ? maybe help you..
Hello,
do you have Perform the color registration control adjustment (FS-05-4719)?
if yes then
(1) Perform the mirror motor initial excitation setting (FS-05-4721).
(2) Perform the color...