Search:

News update: after disconnecting the cable to the main motor it seems booting up and stay on....

Hi there,
my scx-5637fr has a strange issue
Powers up, display say "initializing", then just after "warming up" turns off and on the main power
Changed the SMPS board with no effect.
Disconnected...

This is my case. Fuser rebuilt using china rollers. The copier very frequent says error codes about low or high temperature. The black frame surrounding the thermistor may be bent, so it can be...

PTC is also known as thermistor.
In this machine is not so near the pressure roller.
It is a double face component, in a mylar case, facing both the pressure roller and the fuser case, copper...

Hi all,
need a feedback on the C353 fuser.
There is a ptc to sensing the temperature. My question is: what side of the ptc actually is sensing the temperature?

yes, but also tried the "problematic" cartridge in te P2015 and it's fine.
Update: turned on the printer yesterday, leave it on all night, is on and ready again (well, not ready, still says "insert...

Hi all,
here lies an HP M2727nf with a strange issue.
The machine seems to die ONLY when a toner cartridge is inserted in. If i leva the toner out of the machine the power is solid on with no...

clean the paper pickup solenoid, seems the noise absorber pad is become sticky.

not tried the half-way printing.
The machine has all the counter messed-up (K drum is at 195% and fuser is at 224% of the expected lifespan).
i was thinking at the K opc drum.
the line is very...

hi all from italy.
just went to see an irc2380 with a thin black line near the top of the page.
It seems to be repetitive, so before go on and change anything (opc, transfer and so on) i'm going to...

hi all,
need to remove a fs-508 from a dead bh250 and i don't remember how to.
Please help.
Thanks in advance.

Hi all,
need to swap few bizhub C353 and all of these copiers have lots of copy programs. There is a way to save all of these setting on a pc and restore them into another C353?
Thanks.
Luigi -...

Hi all,
just bring back to life an MPC 2050, now the next issue: the ardf cannot detect the original documenti in place.
Just performend a few SP tables and i check all sensor are working, all...

Hi all,
just visited a client with this error code on his copier.
Anyone here can send me a firmware upgrade for this machine?
Any help is appreciated.
Thank you.
Luigi - Digitalix

PS: i do...

Tried a month ago a Develop Imaging unit in a c353 and it works without problem at all, like a konica minolta. I think those imaging units are all the same.

Hi All,
here lies an HP cm2320nf that prints ok, but if i want to make a color scan or copy it printouts only in grayscale.
Just replaced the ccd but the problem is still here.
Performed a...

Hi all from Italy.
Anyone here knows for sure if a Bizhub 250 can forward incoming fax (PSTN) to a email box?
Thanks all
Luigi - Digitalix

is the job printed from the same computer? maybe it could be a driver issue...

Cartridges are ok (tested other 2 cartridges that works on another printer)
Now i look at the cartridge HV contacts and the transfer roller.
Thank you so much.

Nope, laser shutter is ok.

Hi all,
here lies an old-but-still-good hp 1320.
Changed main power board, laser and formatter, now it is still printing only white pages.
The laser lock mechanism looks good.
Any ideas?
Thanks

I forgot also i did a cold reset (this printer doesn't have nvram initialization).

Hi again and thank you for the quick reply.
Why i need to replace the transfer belt? It is not worn, all the color looks pretty good.

Hi all,
here lies a color 3800. three months ago asked for a new fuser, after replacement the yellow color is misaligned, it prints about 4/5mm higher than the other colors.
All toners inside are...

Hi all,
here i have a Bizhub C353 installed on various Windows 7 boxes over ethernet cable.
The copier has many options: like finisher, saddle kit, paper drawer.
Installed 2 months ago, today the...