Search:

Type: Posts; User: bronxteck

Search: Search took 0.00 seconds.

  1. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    hah what am I chopped liver :) can I be his lackey? hahhah.
  2. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    well the 8300 had also a blown resister on the CR board which the 6300 does not have. I think the pins from the head are routed directly to the flex cable from what I remember. check the head ribbons...
  3. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    well you should first try reflashing the latest firmware with L-service printer tool so that the new heads also get updated with the same firmware...

    also did you just swap out the heads while...
  4. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    ok got board and installed the bad head that fries the logic board to see what it damages on the left side and to see what errors it creates. so again in blew out one line on the 4 resistor pack...
  5. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    sorry to take so long to replay but there was a good outcome :)

    well I finally found a solution and fixed the 2F48 error on my IPF8300s and my ipf8300.
    the issue on the ipf8300s was 2 open...
  6. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    just an update

    by the way i took your advice and my solution to this problem was to get another working machine. it was cheaper then dicking around with this one since i had to get some work done...
  7. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    well I went through all the boards. head board, rc board, main board checked all the pico fuses even went through the power supply I did not find anything other then it sure as heck likes to dump ink...
  8. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    did you replace it with the same board or are some boards cross compatible? like using a 8400s board on my 8300s but force flashing 8300s firmware onto the board with L service printer tool. seems...
  9. Replies
    45
    Views
    28,030

    Re: IPF8300 Hardware Error 2F48

    I just got a hold of a ipf8300s displaying the same issue. originally it would not give correct printer head info serials where FFFF so I removed the printheads and the machine fired up and started...
Results 1 to 9 of 9