I replace exit unit too...
Still same situation...... :confused:
Type: Posts; User: Syed Naseem
I replace exit unit too...
Still same situation...... :confused:
I replace the exit sensor too..
But problem still same.
Hello everyone..
I have a bizhub 600 which show paper jamming J-3206.
I will check completely but nothing paper anywhere.
I replace complete ADU unit but still issue same.
Have any friend idea...
Hello everyone...
I have laserjet Hp printer 100.
Which have image isuue.
I upload the image file.
I was clean laser unit twice.
Replace new four colour catridges.
Several time run calibration...
First of All Thanks Dude... :)
Interesting point that customer call me and request to take toner on the same model and also he told machine running without toner for last 2 days. May be it use...
Hello Everyone...
CodeC-2411
DescriptionTCR sensor (TCRS) output abnormality 1. The TCRS output is detected more than 3.0V (153step) in printing.
Causes• TCR sensor (TCRS) • Printer control...
Hello everyone....
I want to import some machine parts so i need parts manual for bizhub 920 and 950.
If anyone have free parts manual for above model kindly send me...
Thanks
Hello Every one....
One of the most unlike situation for any technician during attending servicing complain is paper jamming issue.
And if the machine is bizhub 950 or 920 :(
Soo much paper...
Hello everyone.....
I have facing error code c-2211in my bizhub 950.
During copy after 5 to 6 pages machine stop immediately.
Have anyone facing this kind of issue before???
Thank you soo much.
Tomorrow i will go and checked the possibilities.
Hello everyone...
In bizhub 950 finisher work normally but Occasionally it through paper out of the receiving tray.
I replace paper form Roller but still paper flow like that.
35626
I also...
Yes sure both heater lamp working.
Hello everyone....
35625
In my bizhub 950 shows Ready for copy suddenly Machine shows warming up please wait.
I checked and clean thermistor.
Both heater lamp working i checked voltage too....
Thanks buddy..
Issue is solved.
Hello everyone...
I have bizhub 950 issue with scanning size error.
When i put A4 size paper on original glass its show 8×11.
Which cause image erase on top postion of paper.
Same when i put...
Hello every one...
I have facing error issue in my bizhub 950.
Which is C-A101.
Any one know how to solve this issue plz give suggestion.
Thankss.
Just check the text image.
Blue shade is not issue.
Yes sure.
First i update firmware issue not resolve.
Then replace engine board and machine work fone. :)
Yes Sir i have install new drum units and tranfer belt as well but problem still same.
You have engine firmware for this model ??
Are you sure engine firmware?
I send image of result.
Hello everyone...
I have facing print issue in my bizhub c652 last week.
I changed All the Drum , Transfer Belt and heater unit but issue same.
Mostly the issue comes when printing A3 duplex copy....
Thanks to reply first....
Second i clean encoder strip.
Then check belt which look fine.
I doubt on strip soo i order online.
Within a weak i recived strip.
After replace new one hope issue will...
Hello and hy everyone....
Hope every one good and fine..
I have a plotter Hp Designjet T520.
I made the error video in this link...
https://youtu.be/HQ5OZHSiOk8[/video][/VIDEO]
After the...
Hello everyone...
I have Hp Designjet T520.
Shows error after power on.
"The print carriage cannot move.
Open the ink cartridges access door, clear any paper jam
Or obstruction , and touch ok"...
Hello Everyone...
I have Bizhub 920 working in very Gud Condition:).
Issue with his Finisher... :confused:
Show Strange code error message which i was not found in Service manual.
Failed...