Good point. Did that allready after each firmware that I tried, just to be sure. Now, the print service plugin that works best is the Samsung one. Only drawback is that it default the paper size back...
Type: Posts; User: onetek
Good point. Did that allready after each firmware that I tried, just to be sure. Now, the print service plugin that works best is the Samsung one. Only drawback is that it default the paper size back...
Thanx, making some headway here. Printer is found, I get a warning that " this printer may not be compatible" but it prints. Have to add it manually, by IP. Now I have to find why usb ports are not...
Sharpdesk mobile is not working either.
Ha I to 221.204 , still no go.....Sharp print service plugin sends print job, the comes out with "printing error" "check network connection or printer state".Printing still ok from my linux laptop.
For some reason it works with mxc407f , but not on the last 3 of our mxc507f. Also , I noticed that after the last firmware update. (081.215 to 081.234), the same usb flash drives that were used for...
Hi all,
Customers asking to print from their cells to MXC507F. We have a couple in the shop, printing is ok from Linux, Windows, but not from our android cells. Tried with Sharp print service,...
I am dealing with a 4071 throwing U5-20 random , never when I am there. Sims motors and sensors checks all ok.. Already replaced board ,sensors, clutches. Got to go back today with main adf motor...
search for MQ01ABU032W and you will find some for sale on google.
Would it be the same as HUD_M/TH_M sensor?
Hi guys.
I got to go check a mx3050 giving a E7-A7 error. I'm gonna try the CN update, but just in case I would need an image of its msata. I cannot find where I backed up mine (old age?). So if I...
I have seen some run out of dev as low as 30k....... Every thing was clean as a whistle inside. Still scratching my head.
PM sent.
On a mxc407f , while waiting for a main board to fix a random firmware error 900, I figured that I would try the latest firmware from Lexmark. All went smooth, (but it did not fix the error). We have...
I still have a few, some with 1000k copies. They still scan to email easy, but we cant get black dev from Sharp anymore.You better have a second as parts doner. Attrition is comming.....
Do you have DSK kit installed? latest without DSK is "MXM283_HDD_TLS12_Jupiter3_(with HDD)_Combi_0304j3w0_B.sfu"
Like Copiertec said, its probably stretched and not turning. In a pinch, you can just cut the belt of and use the machine for a few days without jams. (done that many times).Its driven by the same...
My bad, the copier in our shop with a disconnected fax board is a MX-C407F. No F6-00 on this one, just error 900 popping after sometime. We disconnected the fax to make sure error 900 was not from...
Remove back cover , disconnect fax , done.
Dev was at 90%, a couple of F2-78... Would not finish sim 44-6, 44-26. Replaced dev, drum with unit, cleaned right door contacts and saul goodman!
Just did a dev change on time on a mxm465, and had to clean mag roller.....oem everything....
If you want to make sure its a dns problem, use gmail smtp ip instead of name(172.253.63.108). We have a few 4101n scanning with gmail smtp. Settings are: smtp.gmail.com
port 587 , ssl. gmail...
Sent you a PM , did not go through. Try to PM me for manual.
Check around page 67....
Did you check the sensors in maintenance mode switch scan tests?
Yes, they fit. The 5001 has a clear mylar under the blade, the 5110 has a black mylar but they fit. In fact , you can use the complete belt unit from a 5110 in a 4101-5001.