Pull the printsystem board out, if there is a hard drive pull that. On the board where the drive will be you will see a jumper on 1 leg (keeps from getting lost) take jumper and short out I believe...
Type: Posts; User: russmacman
Pull the printsystem board out, if there is a hard drive pull that. On the board where the drive will be you will see a jumper on 1 leg (keeps from getting lost) take jumper and short out I believe...
Oh yea. Have been selling so many more data security kits. Can anyone give me info on a service way to format. And yes I know that my 12 gauge would fix it, but i need it to work when the wholesale...
I am the service. We sold them a Kyocera, and I don't know how to format for the customer. Sending back to Leasing Co., and customer watched the big news story on copier hard drives....
Thanks for the reply. But I don't know what the numbers refer to. Is it a maint. mode, or could you explain the steps. Thanks
Can anyone tell me how to Format Hard drive on a Ricoh MPC-2500? Need to send back to a leasing co. and want it wiped. Thanks. Russ
There is a "sim" for just a "print only cassette" Try sim "341", that should give you the way to print only that cassette. Russ
OK lets start. I assume that you can get on a browser page from the IP of the scanner correct? If so look on the left side for you email settings. You will need your SMTP host name or IP address....
Are you asking for scan to email, folder (and or SMB?) Let me know. Russ
Thank you so much everyone for the information. I will give it a try this week. ** Maybe all of us can setup a link or post for all of us to with a quick way to format an MFP drive for all types of...
Hello all... I have a Toshiba 452 and a 352 that I would like to send back to a leasing company. This is not a brand that I service or sell as of yet. Customer downsized and purchased a rebuilt MFP...
I believe that you have to do system init. from the system menu. This will wipe the info from the fax memory. Start machine with front door open, go into system menu and do the format. If still you...
Please send me your email address (private if you like) I have made up a Screenshot PDF that I would give out / send out to customers to setup the scanner file program. It will work for email and...
New firmware helps LOTS. 4.xxx. Make sure you do color cal, than gray adjust after update. Muddy image is / has been reg. off color cal (little lines that you have to line up, 9 boxes). let me know...
Yes it is... Looking at one now. You will have to see the driver from your workstation. Russ:)
Well... What level is firmware? Controller should be 1.20.00. Printer should be 108X14J and printer driver for PS should be 102. Russ:)
Had same problem on KM-5050 with forms (formmaker pro) Send the prescribe info over as "wisecore option" (little check box) Different seeing, and deleting the cards when you restart machine. I sent...
Ok... could they be running vista 64?
Try this... Look / see if the light and or receiver at the top of the main tray is out of alignment. They must see each other to keep the tray at its highest point. Had one that the light from window...
PDF printing will work the best if you install the UG-32 option. A small USB key that will enable printing large and fast PDF's. Pricey.... $350.00 or so...Then install PS drivers and it will work...