At first i would check the airprint function directly after a restart of the machine (power off/power on). If machine after 2 minutes not more selectable in airprint menu then there is another...
Type: Posts; User: aktasson
At first i would check the airprint function directly after a restart of the machine (power off/power on). If machine after 2 minutes not more selectable in airprint menu then there is another...
First of all same as it ever was... it depends on your location, usugae profil, (paper)quality and behaviour (of user) . The toner replacement is a litle bit tricky but tradable. The adf is sensitive...
Thanks, i found it.
---------------
Hi there!
I'm searching the HP admin-tool like Kyocera Net Admin/Brother BRAdmin/RICOH Smart Device Monitor. Where i could find it?
Regards,
Aktasson
Unable to print after installing update KB4560960 and/or - Microsoft Community
Windows 10, version 2004 and Windows Server, version 2004 - Windows Release Information | Microsoft Docs
The June MS 10 Update creates a lot of printer and driver problems. You can check it out with PC-Info and under Windows Specification have a look to the version. If version 2004 is displayed, the...
I have a lot settings for foip (voip) terminal adapter environment. But in many cases i just configured the baudrate to 9600 and ecm for sending and receiving to off. This was enough. Newest adapter...
SP5-728-040: Port number default 445(0), 139(1) --> 445=1
SP5-728-041: default SMBv2/SMBv3 Active(0), Inactive(1) --> Active=1 ...
Minimum FW Package D1965406Tv Ver.15.00
Minimum reqired FW
...
By the way, check this here if usable in your case:
-System SP 5-191-01 Mode Set - Power Str Set -> 0
-Printer SP 1001-09 Bitswitch 9 bit 4 -> 1
-SOP SP ([clear]-8-0-6-1-8-2-#-#-[C]) -> Screen...
And right cardreader confg file for customers chip installed?
There is a another way in Service SOP to connect the cardreader the right say. Have you do this way also?
Cardreader on Controller or SOP connected? PID and VID data added?
I had a similar problem on a A3 mpc, but same on feed direction. In my case it was the drive/motor to development unit. First page mostly was good, but the next pages on a multiple print/copy job...
Question: All checks in frozen mode, no restart of the machine!!! machine in frozen state it's possible to open the WIM and ping command to the machine positive? Check if network connection by led on...
Another suggestion... check all paper cassettes, take them all out and have a look inside to all trays for paper leftovers. Same issue two time with squeezed paper in tray 2 arround cassette sensors....
First of all you need depends on organisation policies a o365 licence and a account for the mfp device to have the rights to access the mailserver. Further it's a configuration issue around the o365...
Something wrong with the @remote request no? I asume it's a cumin installation?
This works only on site to the machine:
With sp5816-201 check the state
-202 entering request no.
-203 start...
Customer is using a proxy?
Check --> sp5816-201 (if 0=OK)
-204 (9=trying to request, 0=OK)
-207 (9=trying to request, 0=OK)
I think you have to init and rewrite the cert of the machine. If 802.x is enabled, after that you have to write customers cert for network auth.
I think someone refueled the machine with profiles/configs from slnx (dmnx is integrated in slnx v3). So the machine would like to talk to the server. You have to find and talk to the tech who did...
Just a suggestion... Transfer Log Setting checked? Streamline NX v3 or Device Manager NX function for collecting Device Logs checked?
Aaah, slnx, streamline problem :) Problem to communicate with the delegation or core server? More detailed infos about the environment?
Why not? Perhaps, you could at least take a quick look at it.
I had in my case a defective paper sensor. I have found it with SP Input Check.
Please attach the first and second page of smc list, sp-5-990-004.
All is good my friend, cheers... https://uploads.tapatalk-cdn.com/20190806/2fcd2bf1824fb713629f587c4df8c275.jpg
As I said... cesa.
Customer Engineer Support Application
It's called 'cesa' or something like that. I used it first at hardware training course and personally never used in the field. You can download it on my-ricoh.