MIRACLE The copier works no longer sc390. The sensor signals the right voltage. Today I turned it on to try it again and I noticed the correct voltage in the parameters. I photocopied more than 10...
Type: Posts; User: vitalra
MIRACLE The copier works no longer sc390. The sensor signals the right voltage. Today I turned it on to try it again and I noticed the correct voltage in the parameters. I photocopied more than 10...
Hi, even to me does the same, I changed developer and always sc390 and vt 0.00 after 9 copies. Does anyone have an idea?
Sorry I do not understand what you mean
I cleaned everything up and in development I inserted the gray developer envelope and then without toner I ran the process of initialization developer.
Hi, I cleaned everything, inserted type 28, made by sp mode initialization developer without toner. After I put in the toner bottle and photocopied. After 9 copies still sc390 error, the td sensor...
recapitulating the type 28 to be inserted into the printing unit and sp mode 2214 and the sensor should work.
hello guys, I have the problem sc390 after 9 copies. I added the toner charging in the developer because after a 150 copies is exhausted and returns me faded copies. The vt is 0:00 td of the sensor,...
of Ricoh MP2000 aficio I have a sc390 error, use original toner, drum and cleaning I
changed the blade. It has 65000 copies. I checked the following values in sp mode:
2.926 standard VT...
Hi guys, I too have the same problem with Ricoh Aficio MP2000, after 9 390 error copies Wonder how we measure the TD values (type VT etc.)
since the addition of the toner manually in the development group gives me that error 390 is as if descended from the toner bottle, I feel it does not turn the toner bottle. They came to me with...
as the difference between the original toner bottle and this B121 9645?
[QUOTE=NeoMatrix;552653][remove google translate]
Original problem sounds like under toning.
Could it have been a second toner cap stuck in the toner hopper?[/QUOTE
]
in the print...
I explain what I did: I replaced wiper blade and drum after 65,000 copies, coming out dark and dirty output. Watching a video on the internet on how such maintenance was made and I also removed the...
I understood the toner density sensor, I have to replace it? there is something to check? you can try to reset and how is it done?
Ricoh mp2000 aficio
Good morning, I had to add the toner in the development as it came out faded copies after adding a new toner refill. Now after 9 copies me out sc390 error, it seems that the coil of the toner does...