Search:

Every 10 Sheets I am getting these colour blocks that are printing. I am just printing on basic 8.5 x 11 paper.
Any suggestions on what is causing this. I just replaced the transfer belt and...

Hi - is there a way to adjust (lower) the fusing temperature on a Xerox DC240 - we are running on plain paper mode and the prints are coming out very hot, shiny and curly. Enhanced gloss is not on. ...

Hello Everyone. I have an odd question. We have a C6501 - (IKON Branded CPP660) and we are pretty sure that these parts installed are wrong - they are just not fitting well. Most important things...

If the offset job has an AQ Coating on you may not be able to feed it - futher - AQ Coatings are generally not heat safe and can leave residue and damage the fuser. If there is not an AQ Coating on...

Hi Everyone - Wanted to get some feedback regarding the PM Service Cycles. I have a C6501 with roughly 1.2Million on it and a second machine with about 500,000. More than 90% is colour meter. One...

no resolution at all. The machine is still not working properly. We are having to get very creative on running anything through the machine. We are bringing in another machine, so that we can test...

Empiru - I did not change the unit, however, the service tech did - as per the adjustments - I am not sure if they were done. I gave up and bought the 2 service manuals so that I can see what the...

Empiru - i have decided that my business is more important than the attitude of my tech - so, I am tackling this myself. First thing - I made a pic of where the magenta was before i made any...

Hi - Sorry I did not write back. Easiest way to put this is my technician is a BONE HEAD. They will not make the adjustment, they will not allow me to make the adjustment and now they are blaming the...

thanks- i will try that tomorrow - and get back to you.

Empiru -- Attached is a screen shot as requested...9635

A asked the tech about a manual color registration adjustment. - and got told it doesn't work. So they only do the auto color adjust. Can u provide me the instructions on how to do the manual...

I am battling a problem that has persisted for over 2 months now. We have a misregistration that is causing blurry text and seems to be mostly in the magenta. For example if I try to print blue text...

I have a problem with a C6501 - trying to get back to front alignment from tray - and it will not align up. We have tried to run the "align tray" feature - and what we have found is that the image is...

I have a C6501 and recently we've had a color issue that the tech can't seem to resolve. The color is not consistent from the left to right side of the sheet (when holding an 13 x 19 Sheet...

I have done the adjustments - even went through the entire tray alignment procedure.
How do I check regarding the Auto Centering Sensor?

I Have a very strange problem. Printing 13 x 19 Sheet - 10PT Carolina C2S Stock Coated GO 210-256gsm - every 2nd sheet the back to back registration is off by approx. 2.5mm. For example if I send...

I Have a C6501 - a lot of jams on Autoduplex. The paper I am using is within spec -- and uncoated - only 216gsm actually.

I jams whenever I try to run more than 1 sheet. If I send 1 sheet - it...

Thanks for all the suggestions...

Looking at the image -- the lead edge is on the left side - the defect is closer to the lead edge.

If i move the image (margin shift, etc). the defect...

Hi,

We are having an image quality issue on our KM6501 (branded as OCECS665). I've included a PNG Image of what the defect looks like. It is a line that appears on 17 x 11" or larger stock, the...

Can anyone test out printing a sheet of 12.99 x 19.00 stock - custom size defined.. and have if print to the main tray of the finisher. If you tell it std. 13 x 19 - i know it won't allow you to...

I have a 1mm skew on the prints that I can't seem to correct. The skew is consistant.. it is always 1mm... I have found every other adjustment but cannot find a skew adjustment. I have cut my paper...

I have excessive curl on the output (from all trays) from all papers. There is quite a bit of curl as it lands in the output tray. Really bad on 12 x 18 Cardstocks that are shortgrain.

Does...

Not "bagging" the tech... The tech has tried everything. We are not only having issues from bypass ... But from trays too... I would gladly purchase an lct if it would work - and solve the problem....

I have an OCE CS665 (KM 6501) for 2 months. We have a crazy amount of jams when feeding card stocks.

My default card is a 280gsm Productolith 12PT C2S 13 x 19 (330 x 485mm) . It jams every 20...