Check that you havent damaged the pins on the belt connector very easy to damage if you taking belt in and out
Type: Posts; User: outdoorkatie123
Check that you havent damaged the pins on the belt connector very easy to damage if you taking belt in and out
Hi Check the duplex section on the side door have had this code a few times and always been a paper jam in the side door
Hi was wondering if anyone could help im getting intermittent eprom errors on a Utax 3206 c7911 c7912 and c1950 the errors are probably only happening once a week
iv'e replaced the feed image...
Hi guys the problem that we are experiencing with these fuser units is mostly the lower pressure roller bearings wearing out prematurely and the grease between the fuser film and heating assy...
Hi do you need to regrease the fuser belt ?
The problem we are having when we get C6600 is that their is to much friction between the belt and the heating assembly the grease seams to make its way...
Have had this fault on at least on five occasions and its never been a fault with the motor
the toner delivery assembly is pretty sensitive and gets compacted
what ive did to repair is remove drum...
Problem solved turned out to be faulty Engine pwb
Already replaced primary transfer belt and the dev unit doesnt have the little grey button
TASKALFA 2552ci
Hi guys the copier is a UTAX 3206
ive already replaced the complete drum unit which comes complete with charge roller also replaced magenta dev unit and primary transfer belt
Although all colour...
5478354784547855478654787
Hi here are some of the sample copies i took whilst on site
everything copied or printed in colour has magenta lines all over the page
already replace magenta drum and...
Hi anyone ever have this fault everything colour has magenta lines covering the copy but there is no magenta in the copies
if i run a calibration the magenta is missing
if i do a one colour...
Hi anyone have any idea whats the best grease to use to lubricate between the fuser film and the induction heater
have about 4 fuser units that all have the same problem of fusers running tight...
Hi just wondering if anyone else having the same problem as ourselves
We have had a run of machines UTAX 3206CI that the fuser pressure bearings are failing.The bearings are running tight and...
Hi those marks on the drum are common on those machines but shouldnt affect copy quality
Are you having copy quality issues ??
Machines out of warranty
Hi anyone know where the best place to buy fuser films for kyocera 6052ci or utax 6006ci
Hi have had a similar problem and it turned out to be a build up on the mag roller
hoovered the old dev out cleaned the mag roller with alcohol and the difference in copies was day and night
Hi just wondering if anyone has had any issues using ppc toner in current range of copiers
Thanks for your reply,we are supplied with blue cloths and glass cleaner but ill try white and alchohol
Hi yes tried both solutions suggested
Hi anyone any ideas have a couple of mx2640 and they are producing light copies but prints are fine
both machines have had complete services optics laser every thing cleaned
Had this problem a couple of times and turned out to be a build up on the mag roller
Hoovered dev unit completely out ,cleaned mag roller and blade with alchohol.New dev and both machines working...
Hi i have a quantity of assorted panasonic consumables drums devs heater rollers if interested i can let you know exactly what i have
Hi you need to reset fuser count and it belt count to zero
They are in the maintenance counts if you cant find them let me know
regards
joe