What is this error code indicating ?
All I can find online is to unplug and plug back in . Any help would be greatly appreciated
Type: Posts; User: wild140
What is this error code indicating ?
All I can find online is to unplug and plug back in . Any help would be greatly appreciated
Is there separate drums for the Dell 3130? customer stating yellow smudges and they already swapped toner cartridges
Also looking for parts # for Canon PC940 jam access cover , Right side
Replaced the black drum because of streaks on the old unit. Now when they print the black only in areas where there is a picture seems to be missing or very faint , text that is pure black looks...
That was it. Took me a little bit to figure out what leaf springs you were talking about , pulled them forward a touch and that resolved the issue.
Did not know that sections normal position at...
I apolagize I did not specify that after the unit is turned on and comes to ready without any jobs being run this starts to hapen and it happens over and over so it is not normal operation . I will...
After first initialization and after about ten seconds the " Shutter Tray Assy" (page 4 part 21 of the parts book )will start to lift up for no apparent reason and when it gets to the top falls back...
The display does not give a numerical jam code / I wish it did . I wonder if that is part of the issue ? Have not researched where in unit to view this log. I can not print out a report because of...
I have one jamming out of every cassette right at the registration roller/ checked all switches in service mode and I do see the states change though they are a little different from another C3055...
Saw one post online that it could be the Display Port Data Cable gets broken where the clamp is . ( different model C454 )
I downloaded service and parts manual but do not see a "Data Cable" in the...
In the web interface the "test" button shows OK , but scan to e-mail still fails with this code. Latest firmware has been loaded. Any suggestions
Thank You London, The unit is not under contract so the client is up in the air about paying for the Service call. I appreciate the feed back.
About the only thing I can find is that it is a CIS error. Can this be reset through service. IOs this unit a Konica/ Minolta with different covers ? Looks very much like one and web searches bring...
The only reason I do not believe laser is it is very random , does not blow any codes and only happens on legal .
Image Processing are we talking boards ?
Also replaced drum and updated firmware N/G , got spec ial reset firmware from Kyocera because of bad directions in SM about resets when replacing drum. No help
I do not . It is a very light shadow so I don't think it will show up on a scan anyway .
Please see attached . It only happens on legal and is very random. It also seems to trim area under the box where there should be image
One out of 100 , sometimes if two sets are run it will happen...
paper in letter portrait direction shadow from top to bottom ( not lead to trail ) varies from 1/2 " to 1 " on lead edge on back side of single sided copies.
Not the drum or transfer belt .
...
Thank You !!
The one that you can see when you pull down the Platen Flap. The service manual calls it exit/reverse
I have parts books for 3020 and 3018 but I do not see it in the pictures.
Than you in advance...
Per the SM seems to be relatively easy , I can pull out all other colors and black DV but black drum seems locked.
Also can not remove TB Unit I removed the Cleaner , Turned the lever in the upper...
Edward with the dolphin emblem , Did you ever work for a Kyocera / Savin/ Konica Minolta dealer out of Deerfield ?
Not sure what the Dreaded SM1 issue is . I forgot to mention it is a C5045 , It was working in one environment but our customer upgraded and sold there unit to another person who called us to assist...
Scan to e-mail not going through , checked SMTP settings and set to Gmail IP address vs SMTP.gmail.com
This unit was working in a different environment with a different g-mail email .
In the...
You are correct 12o never moves , I have a 2020 here to test that on, I can try 401 . The only issue I have with 102 is how do you determine which of those Large where color and which are black and...