make a copy and crash it to try find the point to wheres folding the paper, does it make a noise when its going thru the ADF asif the paper is catching ?
Type: Posts; User: floody
make a copy and crash it to try find the point to wheres folding the paper, does it make a noise when its going thru the ADF asif the paper is catching ?
has there been any paper jams in tray 2 recently? could be locked out and might need a trouble reset to unlock the tray? turn off the machine and switch back on while pressing the you utility button,...
whats the jam code? also have you tried swapped the paper tray from T3 or T4?
looks like its jamming at the rollers? is there an out-put mode to test the duplex motor?
looks me to the DF is not in line correctly, loosen the screws on the hinges and adjust the DF
have you tried printing from a different tray?
have you tried single colour sky shots to see if the marks you are getting are different in each colour?
is the separation tyres spring loaded on these models? also the plate that lifts the paper is the pressure even on both sides?
Hi All
I'm after some help, I'm after the lastest firmware for a Riso CV3030, I have a log in for there FTP site but cant find any firmware for this model can anyone point me in the right...
morning all
I'm after some help, I've been called out twice to a riso cv3030 the user is getting T01-537 error, I know this is the print drum failing to stop at position A, I've took the top cover...
print something off when you hear the crinkly noise open the main cover and see if you see if the paper is being fed through the machine straight, I don't no much about these machines but is the...
what would you think would cause the arcing? the machine in clean, I cant see any lose or damaged contacts or connecters
the K drum has done less then 500 prints in the past 2 years, to me it looks like toner has stuck to the charge roller and while its not been used its welded itself to the drum.
402974029840299
Hi all
I visited a Kyocera P-6035cdn was getting no image, so I removed all the drum units and it looks like the K charge roller as melted to the PCU and managed to free itself off pulling the PCU...
theres a white plastic clip missing for that clutch, have you taken it off? theres no need to touch that when changing the toner pumps
pick up and separation roller are wrong way round,
I had this last week, changed the CPU board and worked fine
are you using genuine toner?
what's your firmware version? there's a tech bulletin released 11/4/2018 for these error message!
thanks guys for the information, il give your ideas ago and get back to yous :D
ive took all the covers off to watch/check all the flags are blocking the sensors correctly, ive cleaned all the sensors but nothing, its also not recognising the top left cover is open, but if you...
hi guys
I have a Konica C220 in our work shop, the ADF isn't detecting the originals, ive checked all the sensors in service mode and there working fine, ive done firmware changed the board and...
best bet is to try crashing the machine when its printing to try and see what area its creasing the paper, have you tried it from the MP tray?
hi all, Ive been out to Ricoh priport 1215 duplicator and the language has changed to Japanese, anyone know how to set it back to English, I have the manual for this model I need to set the display...