We usually just replace the door section, only thing that sucks about that is the mile long wire harness!
Type: Posts; User: Vikingrepairguy
We usually just replace the door section, only thing that sucks about that is the mile long wire harness!
see if this helps at all
Whats the jam code?
I sure hope you tried new firmware first?
Can try running the load check on the fuser related motors to see if they are all functioning correctly
Clear your browser cache
The c227 and 227 have known paper detection issues, there are a few bulletins out for it, just a really crappy design as far as the size detection goes.
Ive had best success with setting the bypass in admin mode to ignore the driver settings, set it up for envelopes and the proper size, then make sure you smooth them out with your hand to get the air...
Ive noticed a few of the bigger 8 series machines that when you run larger jobs, like 100-200 pages jobs that eventually once the Ru warms up it starts to get some movement on the right side of the...
Does the computer or server your scanning to have a password set up on it, Ive noticed that if the you dont have a password the machine dosent like it. We add a 2nd user called Scans and apply a...
Have you made sure to do the non image erase check, where you turn the lights down and run the test???
Ive called Konica on this code for a different machine and they say its the machine not understanding the data, like if the user is printing from a web site that might have a embedded video or...
I think I'd call Konica before changing software switch, I did the wrong one on a c227's, and I had to do a bunch of stuff over the phone with them, just my 2 cents
clear the cache for the web browser your using
noise from new waste toner box, white plastic exit rollers and yesterday had one at 17k with a squeak in the drum, took me awhile to figure that one out
double check to make sure the marketing area is correct in the service menu
I have a bunch of older koinca consumables and other random parts to sell if anyone is in need. Not going to list all the part numbers but I have alot of stuff.
IU 612Y
IU 612C
IU 612M
DV 612K...
Dang we just had 2 more of these suckers today, we've seen that whatever the cause, the way the sensors are tripped and the way the 2 individual pieces that slide around on the tray, they just don't...
The 7 series machines have a terrible paper size detection for trays 1 and 2, get ready for a few call backs or headaches as the paper guides tend to slide out of position when the tray is closed...
hello my name is Collin and I've been a Konica Minolta service tech for a little over a year
Hello my Name is Collin and I work in Alexandria, MN as a Konica Minolta service tech and I've been doing it a little over a year now, so thanks ahead of time for the valuable info I will use from...