I had seen your posts earlier and they were helpful. Replaced the purge yesterday and after replacing more ink it started working.
Type: Posts; User: WhoDatXLIV
I had seen your posts earlier and they were helpful. Replaced the purge yesterday and after replacing more ink it started working.
Just an update, supply valve opens but no ink flows from the color side. Blacks flow fine. Thinking bad purge unit maybe or could it be something else?
Hello all, I've got an iPF750 that was showing a bad printhead last week. Replaced the printhead but the maintenance cartridge had less than I thought left on it and it coded while replenishing ink....
Have you also tried to rule out the network or network settings by copying the print job to a thumb drive and printing from that? What is the file size?
Never tried it before for this specific issue but you can adjust the network speed on a specific port on managed network switches or hubs.
Thanks. So I head back over there yesterday to test it out. I ran SIM 7-1 thinking that if it would complete then that would prove it was the sensor. I had one with me because I had to change out one...
I’ve got a MX-7040 with a FN19 finisher. I’ve been having this jamming issue that has been driving me nuts. Paper folds up in the beginning of the pass through unit around the first and second...
Thanks guys. Found the tool blackcat created and it worked beautifully. Looks like I need to speak with my pm guy now... smh
38133
It didn't appear that it did. And the 4101 I had this on as well still had it after a pm.
I've got a MX-7040 that has a line on the mag roller where the developer is no longer sticking. It's happened on several other machines as well. What causes this?
Ugh! I should have remembered that from training! (Don't tell Dan!)
Anyone know why my relatively new unit is already calling for a black drum replacement when it only has 51000 copies and prints on it (75000 color)? Shouldn't it last around 135,000?
Thanks!
Winner, winner! Thank you! Really easy to get to and great pics.
At first though, after reading Lunatech's response I was second guessing myself all night. I would have kicked myself but after a...
Probably just a dumb overlook, but finishing a maintenance kit on a CS-3501i and can't get the DLP Rail Lever to engage. Rechecked and seated everything with no luck. Any thoughts?