Strong, secure, and GROWING dealership in Cincinnati, Oh. looking for a qualitfied Field Service Engineer with experience in the Konica/Minolta lines. Immediate opening for candidate with C6500...
Type: Posts; User: Jonesy-5150
Strong, secure, and GROWING dealership in Cincinnati, Oh. looking for a qualitfied Field Service Engineer with experience in the Konica/Minolta lines. Immediate opening for candidate with C6500...
Succesful dealership in Cincinnati, Ohio, looking for an experienced Kyocera Technician.
You can email me (gtrlooking@yahoo.com) or reply to this post.
I have two Mp 4000/5000's in my territory. Both having problems with jams when faxes come in. Faxes are routed to the internal tray of bridge unit. Paper never makes it through the interchange....
Some time ago, I noticed a thread about using a fusing unit for SPC811DN color printer in a MPC 4500. Apparently you need to switch a wire in the connector to get it to work in the MPC 4500. Anyone...
I had one like this. Turned out that the machine was sitting under a shelf..... a white shelf. Periodically it would see the bottom of the shelf and confuse the sensors. Ended up printing a sky shot...
I had one that haunted me for months. Did everything like you. Ended up swapping out the machine. A thought later occurred to me.
This customer was printing a large quantity out of the DocServer....
remove the shutter from the top f the laser unti. If color comes back... ther's your fix. I've removed one of the shoulder screws from these shutters to fix a couple. However, I noticed the newer...
I had one where the SD card for print/scan function was bad. I removed it and the machine came to ready. Ordered a new one and I had it licked.
I haven't had the specific problem that you're facing. However, I have run into problems where some some settings within the word/excel conflict with driver. This maybe adding to a previous post.
If you can find a dealer that sells the 6500 and actually makes the money that they anticipated, let me know who they are, and I'll pay them for their secrets.
The dealership I work for has tried...
I'm glad this subject is being covered. My company is throwing around the idea of company vehicles.
what are some the terms you guys have with your company on this?
Do they charge you back...
He's dead on. I was shocked to learn that doing a full PM can fix SC990 codes.
Outside of that, you roll the dice on HDD or controller. Probably wouldn't hurt to flah the firmware as well.
Good...
I kid you not, I ran into one where I was trying to watch the toner motor run. There is a switch to let the machine know that toner is in the machine. Without the toner, I got an sc320. Check to see...
Has anyone had issues retrofitting these machines to use the old toner and developer?
There is an actuator inside the machine that detects whether the toner is installed or not. If it is bad, or there in fact is not toner in the machine, it will cause that code.
I have a guy that ran into this as well. Just within the last week. Too much paper in tray 1. Machine would read "processing...."
Try running it without the HDD. As a matter of fact, remove print/scan, fax, expanded memory, and all controller options as well.
If the machine comes to ready, you're controller board is likely ok....
With this mod, is there a way to disable the web end counter and sensor detection?
Hello All. New to the site. I imagine there are some threads in here somewhere about printing envelopes on MP C4500. I'm getting creases in the envelopes. I heard a rumour that they need to be fed...