Search:

Searching for advice on how to troubleshoot this issue. When I burn a master on one of my drums, the master fails to load onto the drum and I get this error. The issue is only happening on one drum...

Hello,
I am trying to figure out what's going on with our RP3105. When I scan an image in "line" mode these vertical lines appear on the print, regardless of what drum is in the machine. When I...

I think I fixed it. Just ran about 100 prints w/o issue. In the rear of the machine there is an arm that gets pushed by the timing cams. I believe this arm engages the timing roller. I noticed the...

Hi all,
Has anyone ever encountered this? In test mode I ran the "compression plate home action" and "master compression cycle action". The motor runs when the action is engaged but the clamp stays...

Thank you both for sharing your insight. I noticed that the green lever that releases the feed clutch was busted off so I replaced it. It now prints more often, but is still rather finicky. It prints...

Hello,
Our RP3700 is having trouble feeding paper correctly and gives a paper jam error 9 out of 10 times. The first paper feed system seems to be doing its job fine but after the initial feed, the...

Hello,
I've learned a lot from reading people's posts so far and am always hoping to learn more, specifically about risograph maintenance and troubleshooting. We have an RP3700 that seems to always...

Hello,
Our RP3700 stopped feeding paper properly and I'm looking for insight/advice. The pickup rollers take the paper but after that it seems the timing roller isn't feeding the paper properly. The...

The paper feeding mechanism on our RP3700 has stopped working properly (see video, link below) and I'm stumped. The paper is picked up by the rollers in the first paper feed section but it doesn't...