My Riso RZ970 now makes a new and fresh error:
A16-525, waiting for me to remove the master. But there is no master and when I do the TM401, the master detection sensor is ALWAYS « ON », even if the...
Type: Posts; User: thibaut
My Riso RZ970 now makes a new and fresh error:
A16-525, waiting for me to remove the master. But there is no master and when I do the TM401, the master detection sensor is ALWAYS « ON », even if the...
Ok, I’ll try that ! It drives me mad that the sheet after the master always made this A08-410 error, related to the Paper-ejection sensor !
And yes, you’re right : dealing with the TM timing...
Hey, that’s a good idea !
Just one question to be sure: You’re talking about the feed speed parameter buttons on the machine, right?!
I think that’s an idea, as the problem got something to do...
Hey !
New thread about my super RZ970 which has a real big problem of timing (I had started another thread on a problem I have also with this machine : the masters don’t eject from the drum). I even...
Every has been said here but with Mac I had issues and I also helped a friend with a RZ. When everything was done (drivers installed), sometimes in direct wire connection it just does not work. The...
hey guys,
after dealing with clamp and master ejection issues, and replaced some parts on my RZ last months everything used to work. Just some master jams sometimes, stuck on the drums.
After a...
Hey Josh,
interesting jam. I’ve had many many issues with my RZ970 with master jam, but it was at the ejection, during the master-making process. So, I end up making various various tests around...
Hey,
After having issues with the clamps on my RZ970, I had a problem with a transfer belt on the exit (solved), then, another stuck drum problem keeping me busy.
I managed to remove the drum,...
Thanks for your last suggestion s817. I have another problem very different I got to fix, but in the next days I have to test a new drum !
Since one month, I've had NO problem at all but my drums...
I see you got your answers and "then" have a great solution, and I think I would have been happy to read something like that some months ago. But...
but I've got to say I was wondering for an old...
Update on my last post : A solution
I’ve found a solution for now... After all the story, ending with new belt in the eject system, many tests on TM 543 (master clamp amount) and TM 941 (changing...
NEWS ! or : BAD NEWS !
So ! The story goes on. I receive my 4 belts, for the master disposal system, I put them correctly. Everything is really on this side now.
Anyway, it still doesn’t work....
I totally agree, that's why I am totally a newbie here, like I was saying on my profile, I am totally new to these machines but deeply interested to understand how it works.
Sorry again, to forgot...
Thanks for all your advices, all I have to say is that you know very well these machines !!
Nope, for that, both are looking the same I think.
I think you got it, here. About the roller...
Thanks everyone for this welcoming attitude on this forum !
Not so non relevant, here are my easter greetings made on my Riso ! (I don’t know where to post them to thanks everybody for the help ah...
Your advice is getting me in the right direction, clearly !
So... With the TM543, i change (after many tests) the value of the master clamp-amount adjustment. Eventually, the pink drum works ! the...
I am replying again to my previous post, to add the last and final informations I can take from my machine !
I exchange the clamp plates again (the working one and the new, not working ones).
The...
NEWS !
So, I finally receive a brand new clamp plate from Riso.
It doesn’t work. Same error. Same problem. The master is still bend like on the picture of my first post.
It’s beginning to be...
Update : As the drum was NEW, Riso is sending a new clamp plate, and I will double check again. I’ll put pics here of both clamps!
For now I just think (but not sure) that in the length of the lower...
Yep, for the 2 white collars ! I still don’t see anything but I am going to measure the adjustments between the different parts...
To be continued !
Thank you for this reply !
So far, I tried one thing : to remove the master and clean the drum with isopropyl alcohol, in case the drum had too much ink and the master was sticking to it. It’s not...
Hello,
first of all, as it’s my first post in this section, my presentation is here http://www.copytechnet.com/forums/newbie-check-in-/118191-hi-france.html#post556950 . I tried to search with the...
Hello,
I was reading this forum for a moment, and finally here I am !
I am not a qualified technician, as I was working as assistant for artists and as a photographer, but I am highly interested...