Thx for the Tips !!
Really look through the whole machine today.
And while doing that I got the phone of the old firm which supplied that printer and they explained it was
ordered with the fiery...
Type: Posts; User: Zeerith
Thx for the Tips !!
Really look through the whole machine today.
And while doing that I got the phone of the old firm which supplied that printer and they explained it was
ordered with the fiery...
Baeh ....
Ok , bad news then ... well lets see what we can do then .
If I find the same printer with sd card can i clone the printing scanning programm on the hdd of my printer ?
Otherwise i...
Uiii .... found the spot for 3 sd cards in that plastic part ..
but they are empty :(
Bummer me..
Hello again , going nuts with that printer ....
Status : when i unplug the harddisk the printer is not starting anymore .
So i formated the hdd in the printer with SP5832-001 , reboot
I...
Ok ... will test tomorow .
Clear all is Bad ? Sounds normaly good for Factory reset ;)
will try the other codes as described !
Thx for the infos hope it helps ... dont need an useless copy...
There is nothing important on that maschine .
But i have no clue how to reset that thing to default ...
Will surely unplug the hdd or format it ? How ?
All i want is to print to that maschine...
I enabled Lan and Usb Port. I havent yet tried to unplug the hdd . Will do so tomorrow.
But strange is that when i enter sp mode i dont have printer / scanner options there . Only "copy sp"
on...
Hmm .. ok not same software ;(
is the printing/scanning software part of firmware or anyhow installable? The c3000 is end of life.
is that option installable on the hdd ? If i find someone with...
There is no Sd in the Printer . The Hdd is in the printer and marked as ok.
Is the printing scanning system the same as in a Ricoh c2800 ? We have a c2800 running perfectly.
can i clone copy the...
Hey Peeps,
Sorry for the Late Reaction , but it took a few days before I got a good Ram for the Ricoh Printer.
But Still it hasnt changed. But i found out a little more ....
Seems like the...
Thx , i read the Manual , but havent found the Ram Module . Will have a closer look
on that tomorrow . I guess i will find a compatible one . As far as i read a 512 mb pc2100 dimm .
Hope it will...
Hmmm that could be the issue ... in the feiry manual was mentioned that you should remove one ram module ... which i couldnt find here anymore to plug back... do i need a special ram module or would...
For more information a Screen i took ...
3624736248
Any chance to reset the whole printer to default / factory ? the whole fiery stuff out of the system ?
Would a complete Firmware Flash...
@Zeldaman : In Sp-Mode i dont have sp 5-193-001 = 0 and when i set sp 5-895-001 = 0 the internal Nic is dead and in the printer display the interface tab is gone....
pwb = you mean the...
We dont want to use the controller anymore , but we would use the Printer directly . But the Connection Ports ( lan / usb ) dont work atm .
The Printer itself is booting up normally and showing the...
Hello Copytech Forum,
I recently got a Ricoh Aficio C3000 which was connected to a Feiry E3000 Color Controller. The Color Controller is dead , fried on electrical power surge .
We followed the...
Hello Copytech Forum,
First of all I like your Forums and the help you are offering here , even to People who are not Printer Techs.
Ok on to my Problem , I recently took over some Ricoh...