------------------------------------------------
Hello
if you still need to buy new chips , it is toner chip supplier from here: Toner chip, Copier parts, Toner Cartridge - einmay toner
hope...
Type: Posts; User: PCC.TONER
------------------------------------------------
Hello
if you still need to buy new chips , it is toner chip supplier from here: Toner chip, Copier parts, Toner Cartridge - einmay toner
hope...
------------------------------------------------------
Hi,
Reason maybe is one of followings:
Toner bottle motor (M10)
Toner bottle position sensor (PS28)
Printer control board (PRCB)
------------------------------------------------
Hi,
If E20-0391 error, you can try as follows:
1. Check toner leak from the Toner Buffer Unit.
2. Check toner level in the Toner Container....
------------------------------------------------------------------------------------
Hi,
E067 - 0101 error, you can try as follow:
Check on the primary transfer roller spring, Clean the...
----------------------------------------------
Hi,
Try to solve as follows:
1. The tray 1 shift area sensor PCB is faulty.
2. The wiring between the finisher controller PCB and tray 1...
-------------------------------------
Hi,
Reason maybe one of following:
Controller stalled
Board installed incorrectly
Controller board defective
Operation panel connector loose, broken,...
---------------------------------------
Hi,
Stack tray motor error (FinisherS1)
Replace the finisher controller PCB. Check the stack tray upper limit sensor. Check the stack tray lower limit...
---------------------------
Hi,
TD sensor harness disconnected, loose, defective. A drawer connector disconnected, loose, defective. TD sensor defectiver.
Hope useful for u.
Linda...
----------------------------------------
Hi, Reason maybe as follow:
• System program defective
• Controller board defective
• Optional board defective
• Replace controller firmware
Good...
Hi,
Flash board error.
Linda
------------------------------------------------------------------------------------
china spare part, Toner chip, Copier parts, Toner Cartridge - einmay...
-----------------------------------------
Hi,
As usual, sell fuser film with grease, not only grease
Linda
---------------------------
Correct the harness connection between CIS and DSIPB if faulty. 2 Correct the harness connection between CIS and CISPU if faulty. 3 Replace CIS. 4 CISPU F1, F2 conduction...
why error: E001-002
Fixing Assembly high temperature error (software detection). The Fixing Main Thermistor (THM1) detects 230 degC or higher. The Fixing Sub Thermistor 1 (THM2)/Fixing Sub...