What are the options for Toshiba eStudio 3015AC Color Developer replacement. I find it strange that it is so expensive for color developer for this machine? Color drums and Black developer kit with...
Type: Posts; User: skibum
What are the options for Toshiba eStudio 3015AC Color Developer replacement. I find it strange that it is so expensive for color developer for this machine? Color drums and Black developer kit with...
Examine cleaning unit and be sure nothing is broken and that the rollers are turning and distributing the waste toner out of the cleaning unit. The waste toner has a grey look to it on these types of...
There isn't any developer in this machine. The toner is single component. If the toner is leaking or possible noises from cleaning unit you should first check the waste toner container and look if...
I loaded firmware on another thumb that has worked fine in the past and now it took the upgrade ok. Thumb drive/file issue resolved.
I also upgraded the print driver from Canon's latest UFR II...
UFR II driver is installed which is the same driver across a network of 10 of these IRC5550i's with no issues. This machine is a version 1 IRC5550i but others are the same version.
I will check if there is a conflict tomorrow and follow up. I will unplug the network cable and try to ping the address if I get a reply then there is a conflict. The print condition seems to be...
The Print driver is UFR II and static IP is being used. I will be going there tomorrow and will look at the configuration then I will follow up. Currently they are printing anything other than MS...
Where can I get the SST from? I have an older version from 10 years ago that probably won't work with IR Advance series.
I'll give it a try. The print hanging happens from all 5 of their computers and all different types of files and from different programs.
No. How do you perform that?
I have been trying to upgrade the firmware on a Canon IRC5550i version 1 with no success. I tried using CDS updater and get error 82024206. I tried using USB and get 2 choices push 9 (version) and...
I reinitialized the machine from Data management. It was the previous users settings that held it up. Reset and setup again, works fine now.
This machine is new to us from another company. IT told me they have used the same setup that they have used for several of the Canon IRC5550i's they have and it fails to send. The only thing I can...
I have 1 that is squealing after a few weeks from when I cleaned it last and the noise was removed but it comes back again in a month. Does the carriage need replacing and has anyone done that job...
Can you just reformat and then power cycle on and the original system software will reload onto the hdd from the flash pcb which resides on the IRC5550i??
2 weeks after replacing the Image Transfer Belt kit (genuine HP oem). I now am getting this 59.00.A0 error massage reported by my customer. The ITB has been reseated and still the message wont clear....
Why would this plotter when in idle and no job sent just randomly feed approximately 6 feet of completely blank paper??
Which is better....Canon IRC5550i versus the Sharp MX5070? I am quoting a Canon IRC5550i and my client has another quote from a Sharp dealer.
Is there a part number for the okidata 3641 by pass clutch assembly?
The item I'm looking for is a wiring harness (pair - 2 wires) on the Canon IR8105 fuser unit, thermal switch harness which has 2 screw contact connections to hook up to the actual thermal switch. ...
810 figure 7 Found it. Thanks!
IRA 8105 is correct. What page is Fixing DC Draw?
I looked up the part for the harness to the thermal cutoff switch TP2 and there is no item number. Does anyone know the part number, it is listed as J3203 in the diagram - no reference to part...
I am using static ip only for all past posts. DHCP did not pull up any ip when trying it and since was turned off.
I reset any apps on this Canon C5550i to factory settings cleared the data. When i hooked up to my lap top with a direct connect (laptop, cat5 cable and copier - direct) then I can ping it with...