Search:

Hello sir can you show me how to convert Xerox 4110 I'm have trouble on getting chips so I want to use it without chips

Thanks guys for your reply I solved it and the problem was blockage in the black hub unit. It was not supplying enough tonner into the developer​ unit

Hi. Guys if any one has the information where to buy service manual for the Epson sure press 4033-aw pls let me know by on my pm or on tbyabachwezi@gmail.com

I know there is a sensor which control amount of toner in the dev but there range of voltage so by not adding too much it will be ok.

Ok but if you think the toner is not good then go ahead and change it, if problem still there let us know but also it could be the problem with the way toner traveling to the developer. Coz you said...

Ok good to know if you have the service manual. But any success? You are getting weak print only in black? And have you tried to toner up?

Do you have service manual for this machine?

[QUOTE=Phil B

On top of that I have checked 5v going to DC controller 1-2 are ok.

No any flashing lights on accept on main board-M buy it's not flashing it's solid red. Can you pls give me your email then I can call you thought Mobile?

Thank you for replying, yes I'm tech and I used multimeter to check +3v and fuse also I have service manual for the same machine.

Hi guys. I have Canon imagepress c7010vp when I turn on the main switch only standby LED on screen light, if I press power button nothing happened. I tried to check all power supplies it seems ok.
...

Hi all. Please help me with password for speed change on xerox 57xx

hallow guy, I have problem with one of my client machine it was taking too to power up, so I replaced system software with fresh on. now I'm getting any error of Machine ID error. I know it is a...

Hi I'm xerox eng. I don't know about konica. One of my customer have this konica and it's printing no any image at all. And the bad thing I don't have its service manual so far I have tryed to...

Hi. there is a customer he has xerox dc8080 press, so he called me with an error code 7-287 and 12-295 I don't have service manual or pws for xerox.

please help me what is meaning of those error...

thanks diananto for your advice but the fuser bearing are all ok. any advice pls help.

Hi guys, sorry I have a problem with Buzhub C6500 whenever print from tray 1,2, or but when you print from bypass tray no error. also when you less than 200gm even from bypass you get normal paper...

yeah c452 it has the chip it is located on top of the unit near outside end the chip has two very small screw

I replaced sys board but no luck may be I will check Fuser power supply card. I forget to mention the machine says network initialize with no end.

Hi. have you solved your problem? coz I had same problem but I managed to install the software with the steps explained on the CD

thanks

guys I have problem with my Toshiba keeps warming up and not getting ready for print. also it has a horizontal line on display please help.


thank you.

thanks for the reply, Drums are new but dev is old, but also when you stop while is still testing the pattern there is no any color on the ITB except two thin cyan and magenta line.

hi. I have problem with BizHub C6500 with an error C-4522. I replaced Color Registration Assembly, Transfer Belt, PRCB but the problem still there whenever I turn the machine on. what else could be...