Thanks for your replies,i think i found the solution with your help.
The error seems to be caused by a defective 16 MB DIMM Modul from the Fax System V.
Hopefully the machine runs some more...
Type: Posts; User: syspro
Thanks for your replies,i think i found the solution with your help.
The error seems to be caused by a defective 16 MB DIMM Modul from the Fax System V.
Hopefully the machine runs some more...
Where do i get the latest firmware ?
Hi guys,
Thanks for your replys, unfortunately the machine goes directly to the error message while starting up without a network cable attached.
The "Welcome" Screen comes up, than there is a...
Hi,
i get an Error F245 when power-up a Taskalfa 3050CI, the error-code is not mentioned in the Service Manual.
I detached the network cable because comeone mentioned that it could happen with...
Hi,
a big thanks to Samanator !!!
i have changed the black with the yellow drum and the problem is getting smaller - see the attachment.
37724
For me it seems that the problem is the...
Hi i am back again,
thanks for your comments, i printed out a sample set of U089 (see the attachement).
37708
The dots are on every page (also the colored CMY Pages), the black page has an...
Thanks for your replys, how can i get a printout for u89 ?
I am in Serice Mode and could select under u89 for example K grey ... or sample.
How could i start the test print ?
Sorry for my...
Hi,
we have a problem with a TaskAlfa 3050ci, when we print or copy a page there are small black dots all over the page (see PDF).
We refreshed the drum kit and the developer kit an did the...
Hi,
When prepare or while printing on a Taskalfa 3050ci there ist a squeak noise from the paper transport rolls, the machine has run 310.000 prints and has the 1.500 sheet finisher installed.
...
Sorry, my fault - i mean Kyocera Taskalfa 3050ci !!!
Thanks for your replies, it is a used machine, 5 years old, i dont think there is a part warranty anymore.
what could go wrong if i reset...
Hi Kyocera experts,
is it possible to extended the counter for the maintenance C message after 300.000 pages, the fuser unit still works fine so we dont want to buy a new one.
Which is the most...