Search:

before replacing the formater try to unplug the hard disk and boot the machine. already got this kind of message with a defective hard disk

Event Log on a KM 1810 MFP

1/ enter in maintenance mode
- Press the stop/reset key, start key and the left copy exposure adjustment key in the order presented and hold them down.
- Press...

1810 maybe ?

Guess is this one ?

How can I reset all IB-23 settings back to their factory default values?
With a browser:
1. Access the IB-23 webpage. ( http:// ip adress of your printer )
2. On the...

3835

2 small feed rollers, often the rubber is gone
file:///C:/Users/X/AppData/Local/Temp/moz-screenshot.png

9850 is not a HP in fact its a Konica machine
ask that at konica forum about colorforce 8050 or C500

for service mode check your PM

no reset avalaible, machine have to detect by itself the remplacement

Just try to power on/off the machine

Are you talking about Color registration problem ?

Usually caused by dirty registration sensors

To calibrate the sensors, perform the following:
1. Disable Color Registration Correction...

There is no more scanner avalaible at HP for 3330 - 3380 :mad:

Switch 18-1 must be at 0 ( all switch at 18 must be at 0 )

dont use path use shared name of the folder ( usually SCANS )

Memory stick is different than an USB Flash Drive :rolleyes:

http://upload.wikimedia.org/wikipedia/commons/c/cd/Memory_Stick_Front_and_Back.jpg
...

buy a HP photosmart :)

Dont think there is a solution for your customer with a C3225

Often my HP printer didnt detect the cartridge change (or fuser, transfert belt .... ) on my usage page its still the old item

i have to power off / on the machine to enable the change ....

Have te same problem with a C500 ... do you know if a Firmware upgrade exist for this model ?

Check the attachement for language selection

sent

did you initialize the new developper ? ( 10871087 run U130 )

dont seem to be in admin mode
Must be something like that :

Press the utility button on the control panel
In the touch panel press the controller detail button
Press the menu button
Use...

That's what i love with HP .... insuffisent information

from my HP 9850 manual :
F45-20 Color registration correction results in abnormality. Cause : Printer control board (PRCB) / Color...

i m sure it s a color machine :)

according katun equivalence model its say colorforce 8050 ....:confused:

when i ordered some parts at a konica dealer he says bizhub C500 or 550 ...now i m...

I have Color registration problem with a HP9850 (F45-20)

Is there a way to adjust the 2 registration sensors (PS8-PS9), the HP manual as usual give no information on this point

have this kind of problem when the hard disk of the machine fail

Have uploaded the DF650 part list manual here :

http://www.mediafire.com/file/omj0zy2my2m/DF-650-PH4-BF1-MT1ENPLR3.pdf

[QUOTE=skynet;75808]Both the memory and fax board were swapped between the machines they work in one and not in another.


try U671 - Recovery Fax Dimm :
Enables DIMM that was used in...