Hi adriansto my mail mdcopierx@gmail.com
SeniorTch
Type: Posts; User: SeniorTch
Hi adriansto my mail mdcopierx@gmail.com
SeniorTch
I thought this metod worked with Integrated servers not for External server.
To log in on the server and configue the IP address to print
Thanks for your help Xcopitex
Hello Guys
I am servicing a Fiery server EX700. But no one have the Administrator Password.
Does Any One knows how to get ther server funcionong again whitout it.
I do not have The SW...
Hi,
Who Knows where to adjust this value [LD Power (ESD)......Patch 1 660, Patch 2 540, Setup 1023 Target - Measured- ,Result NG
This happens in Procon on and Off, xerox D95,D110,D125
...
Hello everyone, I have a paper jamed into the drum module, the paper is stuck to the drum even though the separator fingers are fine. The code 77-106 is generated because the paper does not pass to...
Yes, but you must to exchange the 770 plastic key cover and toner chip to the toner V80 cartridge.
Thanks to share this useful resource
Would you please send me the passw to open it,
Thanks.
sorry, I had not seen that. Thanks for your help
hello friends, I have the same problem in a WC7665, I changed the polarization cards of the charge rollers and the revealing units without success, I will try changing the door switch although I do...
Hello technicians versant 2100
Does anyone know what causes the charge rollers to form a 1 to 2 cm band of toner ; Shortly after the drums are installed, this layer of toner also forms on the drums...
print a internal test pattern(19) halftone at 40 %
1 print 3color
1 print black full color
1 print black (K mode)
If the defect is present on the black print (K mode but not in full mode ) ...
developer material on cyan dev housing is low.
hello friends does anyone know if there is a postscript rom for 770 with EX770 server or is it already integrated
thanks for your help
to solve 93-315,
check developer unit gears, empty magenta dispenser, restore nvm 762-313 to 0
try With Chips for:
6R01655 -1658 Sold usa
6R01659 - 1662 DMO
the true is that this machine do not have an scheduled maintenance but I clean it at every call and this varies in time or print production for CQ, jams or hard shutdown for different causes. I...
Hello everyone, I have a problem that the edges of the prints of 1 to 2 cm are smudged. The charge rollers are covered with toner at the ends (see photos) when cleaning everything, it reappears after...
Error 93-315 on C60/70
poner nvm 762-369 = 0
Set Nvm 762-369 to 0
I recently had a problem in a V2100, error 42-384, motor, encoder disk and sensors, wiring continuity, signal voltages in MCU, everything was fine. in the end I replaced
105K31670
AC Power...
Hi Jorgeshm: Could you Please give me more information about this solution.
I have a 42-384 error but nothing led me to the first BTRs.
Thanks for your help
I have 4 DVDs
Fiery System
user Software
FCt clone tool
USB Setup tool
What is the fifth DVD name?
I tried the user software image file but nothing happens.
48348 still asking for iso files.
Hello, I must reinstall the software of the Fiery 5PB server of a xerox C70 printer, by error FF, using the Fiery Usb setup tool, to prepare the USB it asks me for more than one DVD disc, but I only...
check the toner cartridge motor and toner cartridge