Hi..how did u fix problem? having the same issue
Thanx
Type: Posts; User: ColinLouw
Hi..how did u fix problem? having the same issue
Thanx
will give it a try.
thanx you
It does not allow me to go upload.when a click Firmware Update it gives me that message
Do have the same problem,see that rtb change transfer belt to roller..
Change transfer roller but did not fix error code,machine start up sounds not normal so im checking to go that way...
So...
37927Any one had a issue when u trying to install firmware that its giving you that error on web image monitor?
Thanx
Do Someone had a issue with mpc305 when printing smc report getting stuck always some time.
Getting stuck end op sp mode 5998-01-sp6021-01 ....
My 2de machine thats doing it with me!
Thanx
Had a mp2501 with alot of issues.. so with that i burned transistor on the bicu boards,sent powersupply with mainboards away for repairs got it back and burned another board.thought it was a fuser...
Tray 1 ,2 or bypass not feeding at all ..clutches not turning.
did try another bicu board not that, did try output mode no luck..
37467Had my days with a mp4001 adf!
clean and make that black again with black permanent marker. it did solve my problem..
Hi Everyone
i do have a mpc2051 that does not register closed on glass when trying to make copies in ardf. Weird is that it does recognize paper with a beeb sound when putting it the document...
Hi Gents
Did how sort out the problem..
Some idiot had for some reason i dont know why, put the nvram wrong on the mainboard..:mad:..
so if u do get that ... weird sc code maby u also have...
other tech problem did get mine...
to be honest i dont know what he did,got 2 mp2501 thats twins in workshop with same issue sc669-003..dont know if they swap board at back? did swop nvrams and did...
Hi Guys
i have a mp2501 thats giving me sc669-03 EEPROM communication error – Device error
languages under system settings is english when i go into sp mode its taiwanese language?
Hi Wikus
Did u come right?
I have the same issue , can u assist me plz
Hi Guys..
A question quick..
If setup scan to folder,do get it allot that scan to folder stop working and all i have to do is delete local user scans account or retype password and scans work...
Hi Guys
I have a problem on a Mp1350 . Had a Sc 101 Stabilizer issue.when that was sorted the masjien did end up jamming at jam53...cleaned and check everything for jam 53 coudn't find any...
3707737078
Hi Guys
I have a problem on a Mp1350 . Had a Sc 101 Stabilizer issue.when that was sorted the masjien did end up jamming at jam53...cleaned and check everything for jam 53 coudn't find...
37040
36990 Jam J015 -
U-Jam
Have a video that shows how and where it jams,but cant get to load video ..
I had to taken out the tension springs and made my own ones from a mp171 side door and cut...
Having (like Bob Marley said)lets "jamming" issues on rt4030
Copies or prints 4 to 6 pages sent trough and copy and then it sounds like the relay motor locks up and jams before the 1ste relay...
Hi Guys
I have a problem on copier/s time issue..
When machine arrives we need to set time back an hour, but i do get calls from clients espesilly lawyers that the time is out by an hour so i...
Bad pcu units...the same with mp301 pcu's..
Thought about making steel gears,lol...wonder if that also would last..
Never solved a address book issue with a sp mode,duno if its my luck .But had...
Hi there fellow techies...
Do you have any idee what can it be when paper get stuck in feedstation before it getting feed,it makes that kink in page
and i did replace it with all 3 new feed tyres...
:o lol Thanx alot hahaha
Sucks to b new!
But will get on track soon!
:p
Thanx Dude