It can be done, you need to use Kyocera prescribe command language in a pre-amble from the Reynolds and Reynolds software, there in lies the problem, getting someone from Reynolds and Reynolds...
Type: Posts; User: Brettf
It can be done, you need to use Kyocera prescribe command language in a pre-amble from the Reynolds and Reynolds software, there in lies the problem, getting someone from Reynolds and Reynolds...
If the machine is on click rate service charging, you could email it print jobs all day long :p
We have a lot these Smart UX series machines in the field. When you get screen lags and non responsive screen issues, we have found that 9 times out of 10 its HDD related. Things you can try are:-
...
Sorry for the long delay in responding
Mine was caused because one of our techs had replaced the K drum, but the other 3 drums were well past their life. This caused some weird issue in the...
Good machine in general, here in Oz Kyo machines seem to eat fusers reliably.
If you have worked on Kyo previously you would know that MK kits MUST be replaced on time, and machines cleaned...
Recently has a lovely young lady (emphasis on the young, so cant be too harsh I guess) who suggested the machine was printing A3 when no A3 was loaded in the machine. After 30 mins on the phone she...
Any news on this one?
I had the same issue on an MX4 - I re-flashed a firmware 1 version earlier (all i had on me at the time) and it fixed it.
But I have the same issue on an MX7 and have...