Hi guys
Just another update.
Changed the complete transfer belt unit with one from a MPC307.
Much beter qaulity
Type: Posts; User: Voltageza
Hi guys
Just another update.
Changed the complete transfer belt unit with one from a MPC307.
Much beter qaulity
Hi Guys
Just a update.
We found that the direction of the grain of the paper had a big influence on the print quality. Cutting a A4 paper into a A5 and feeding the paper short edge first...
Hi
Brand new machine.
Counter on prints
Machine in clean inside
Normal bond. Rotatrim
Hi guys
We currently have 2 IMC300 with less than a 1000 prints that are printing light prints.
Counter pages are also light.
We have tried.
Different drivers
ACC
I have removed the motor that moves the staple unit completely, so it has not load on. Still moves erratic. If i move the staple unit out of home position the motor should turn to get it back in HP....
Hi Guys
Anybody setup the machine to give a fax receipt after a fax was send?
One of my fellow field engineers is struggling with the issue. According to him if he tries to change the parameter...
Hi Guys
I have a MP7503 that comes up with the above mentioned errors.
Jam Code 125 refers to Booklet Stapler Movement Motor Jam<
After a few time the machine will go into SC720-42
Corner...
If i remember correctly the list is called the Quick Reference Parts List.
Looks like an Australian release.
Sorry for a dumb question but what is TDC?
The little book/excel sheet i had had all the models pm part number on. Just can not find the file
Hi
Not toners. PM parts like
drum
dev
cleaning blades
fuser roller/belts
pressure roller
feed tyre
......
Hi Guys
I got a Ricoh parts list of common parts. Parts with a yield. But for the life of me i can not get the post.
Does someone have something like this please
Thanks
Then why not say gm instead of mm 🤦🏻*♂️😄
Hi Guys
Can someone please explain to me how this fusing motor speed adjustment works?
42787
Thank You
Hi Guys
I am having trouble with a PRO907 that get build up static electricity. Running a big job the machine will give a double feed warning which stops the machine a allow you continue by...
42633
Test print with density at 7. Left is leading edge. All colour do the same in the same spot
Must be, but why only on the MPC300s and not on the other printers?
Hi
I have never played around with fuser motor speeds. Do you know the SP Mode for this and what you suggest i must make the value?
I have replaced cyan dev unit and pcu. Tested it on 3 different MPC300 and they all make the same lines and banding.
Hi
The image is a PDF. I have saved it as a jpeg as well but does the same. There is other images like this also with blue sky that does the same.
If i print the image on a MPC2004 and MPC8002...
Hi Sorry
Was a print job. The line is on the print short end of the page. Dirty laser will cause a line in the other direction.
Hi Guys
I have tested this image on 4 MPC300s and all of them do the same. Line on the same shot. When i rotate the image 180degrees the line is gone. Another image make more of a band.
...
Hi Guys
Can i please have your opinion on this model. I have never worked on one.
- Is it reliable?
- Do parts reach yields?
- Compare to MP301 and MP201
What FTP software do you use. We use filezilla but it only works with the pc IP not the name.
Hi
Not according to this MP C2011 Specifications | Ricoh India
You can also set the machine and driver on Thick 4 which will is for 300gsm