Machine does not have a tag. No numbers are crossed out.
Type: Posts; User: MRJESSE
Machine does not have a tag. No numbers are crossed out.
what parts are changed for the curl?
Installed 2nd btr with metal roller into Xerox V80, from the standard rubber 2nd btr.
Causes paper to curl before fuser and jams.
Recommendations to fix this with NVM change or something else?...
How did you end up fixing this problem?
NVM Value is less than 140.
external roll motor is working.
Just picked up a Xerox 1000
Replaced the fuser belt, belt oil wick and cleaned out the fused assembly.
Comes up with error 10-310.
I have attached video of the yucky noise it makes....
Does any one have the part number for this? Moving company broke it today :(
5998659987
Hi Everyone,
Have a V80 that causes dot's / freckles on the OPC drum (all colors). Drum needs to be replaced and will come back after 100 pages
Has anyone seen this issue before?
58041
it ended up being the dev bias
Is this a dev bias issue?
replaced dev unit housing and is like this in all colours.
thank you in advance :)
54500
Hi everyone,
I just installed a finisher on my Xerox 560 from a simple catch tray.
In fiery it isn't showing up in printer installed options. Could anyone assist me please?
5446254463
How did you fix this?
Looking for Konica Minolta C7000 firmware.
Thank you!
Also is there a DIPSW I need to change?
33-3 was set to 001
Hi everyone.
I usually work on Xerox Presses, so sorry for the silly questions.
Just purchased a Konica Minolta Bizhub Pro C7000. Was working before it was moved to my address.
Once it was...
Because of the toner shortage, can I put TN616 toner (for c6000) inside a c8000?
Hi every,
Does anyone have a link to the Konica Minolta C7000 service manual?
Many thanks in advance!
The gear for my waste toner container has fallen off. Does anyone have a photo on how to remove the Leveler Box Assembly on a xerox 700?
105E17732
Developer housing becomes empty after 15,000 pages. Changed developer housing and continue to add more developer material. But developer material continues to disappear.
Any ideas?
Xerox DocuCentre V 6080 7080 EDOC Wanted.
Does anyone know the NVM code to reset the fuser on Xerox ApeosPort-IV 7080?
Error code 010-906
Attempted to reset HFSI, but did not go back to 0.
These are built into the drum? So I have changed.
Hi everyone,
Have a xerox 7080 (same as D95). Replaced with 2 different drums and have same issue of black line running through. Have attached a photo.
42969
After 100 pages, white dots appear on the drum and the coloured dots appear on the page. Dots are edged onto the drum through the coating.
New dev. New toner. All genuine. Versant 80.
Anyone...