Hi.
Canon tech from South Africa.
Type: Posts; User: Canonaid
Hi.
Canon tech from South Africa.
Hi.
Youve probably solved issue already but if not..
Could try cleaning up all the sdram chips, re-seating connectors on main controller 2.
Hi.
The primary transfer disengagement solenoid is actually attached to the fixing drive assembly.
But unfortunately you will need to remove the main drive to replace.
Can be tricky as there...
The images are quite poor but from what I can see it's just the yellow that's out.
Have you swopped laser to see if the fault follows the yellow laser?
Check that you've put the ITB belt on the correct way as it has a patch underneath. It will work but can throw out errors. But will cause colour alignment issues.
and
I'm sure it's a Environment sensor error.
The fact that all your machines are now showing the same error indicate either all the drum heater switches have perhaps been switched off. Or that...