I have used the Transparency Setting on the PC Driver to get it to print on Card...!
Type: Posts; User: Lenovich
I have used the Transparency Setting on the PC Driver to get it to print on Card...!
Thank you for your input we will check up on this.
Hi and thank you for the reply. yes we have already done that. What i then sent my technical team to do was to do things the "old fashioned way" - strip covers and clean Toner supply system, PCDU...
Thank you for the input, much appreciated. The fault was exactly the same as you described although the solution was different. I changed the rotation times in SP 1511-2, 3 and 4 and it solved this...
Thank you very much for this information!! Changed the settings and, hey presto, machine working with no noise at all!
Good day! Thank you I have already checked these on my visit last week. These settings are all spot on. Thank you for your input!
Hi Thank you again. Checked on this. there is strict control on these machines with User Codes and the machines are locked up at night so nobody has access as this is a high security petroleum...
Hi. Thank you, checked that! As I have mentioned there have been no changes to the types of documents printed or copied. they are 90% black with a small colour logo. The client has been...
Hi. Thank you but I did change the Drum Unit and the Developer Unit and this has not helped. I did check against the PM Schedule and then the Colour Meter Reading.
[QUOTE=fshead;697320]Empty the waste toner container and inspect it after a few weeks to see if yellow toner is being wasted away.
Yellow has always been the one colour i always end up with extras...
Hi . Thank you but have already replaced the Developer Unit.
Thank you .... have checked this and the toner is completely used up.
Good day all
Please help! I have an MP C3002 that in the last month starting using 1 toner a week! Thatīs 4 already this month. We replaced Yellow Drum and Developer as drum was worn. Followed the...
Hi all. Please help!
I have an MP C3002 that makes a a very loud GRRRRR TAC TAC TAC noise from the back of the machine.
This noise only happens when the machine warms up from sleep mode, or when...
Typical Salesperson! Yes man made faults can be the most difficult to find!
I see the paper is wavy. The Fusing Units in the models are quite sensitive. Could be the fusing unit is causing this especially as you have already tried line adjustment and it is not working. I...
in the 90īs,was called out to a Panasonic copier (pre digital) in a Pharmacy. I canīt remember the model but when copying the whole scanner unit moved to the right and back again (Pr1320?). The...