hi have u cleaned the idc sensor
Type: Posts; User: rprem
hi have u cleaned the idc sensor
hi
It comes in all imaging unit, then it must be a transfer belt issue,cleaning problem,or waste toner is full and also check the second transfer,take printout open the side door while the print is...
HI ALL
In Toshiba655 CD-10 error coming while taking print out any idea about the error code
hi first u must have compact flash card 128 mb then format using firmware imaging tool kit and then write nv ram using tool kit
did u get any codes on the machine,u can see the code on the bottom there is a funnel like symbol
hi
have u checked the sensor on the right side of the transfer belt it must be problem,or otherwise install transfer belt and dont put both the screw just put one screw on the right side and...
i agreed with gaffers update the firmware first if u have any touchscreen change and see
there is a screw for each laser so u can adjust it and see
clean the idc sensor,still problem change the transfer belt
suomi said is correct u check the lever on the side door it will be loose that make the switch on and off so u look to it
nv ram problem reinstall it problem will be solved
its a 128 mb cf card and use firmware imaging tool kit,card must be a problem
it comes in any particular gsm board or in all boards
dont use 512 mb CF card use 128 mb CF card to load the firmware it will work
i had interchange the panel to another working machine its working good there so panel is not the problem
u can make it to single color mode to take black print outs,setting is in the autocolor mode only
hai every body,
i one of our cust 253 machine the front panel the brightness adjustment scroll is working but touch screen other keys are not working but in the display its shows ready to copy....
hi to all
In one of panasonic 8016 machine the print comes dull developer some goes to waste toner and some comes out and if i take copies one line is coming and it can be erased on tht particular...
can u sent me the canon service toolkit for 3300
rpremnair@gmail.com
after changing the nvram have u installed the firmware
if the life is over u can take copies with out replacing the iu
hi
just follow the installation manual given with u r machine and do all the steps as mentioned
power supply cooling fan motor rotation
hi u r installing new machine this is the first machine u r installed have u removed all the tapes screw etc scanner lock
hi
while taking copies u just open the side door and see the transfer belt and pull the drum unit and see tht image form in the all the drum