Hi there ,
recently i have move to sydney to take care of my wife to study here , im staying around haymarket side...and i wonder has anyone know or any here is looking
for engineers?
if...
Type: Posts; User: mitsubee
Hi there ,
recently i have move to sydney to take care of my wife to study here , im staying around haymarket side...and i wonder has anyone know or any here is looking
for engineers?
if...
Hi All ,
I can supplier all TOSHIBA eSTUDIOs Machine firmware by Oldest to Latest for all eSTUDIO machine.
please mail me if you are interested
calvinkoay@gmail.com
good luck
Hello Copytechnet,
[WTS] Canon iRseries 2200/2800/3300 Counter Reset method.
Im in melbourne now , very much likely will be in sydney ..... anyone interested in getting this please do mail me....
Hi there , 396 and 4719 is on 05 mode...did you perform wrongly? CA00 = image registration problem , one of your DV is running low or need to be replace
good luck
Open the side cover (left if you are facing the front of the machine ) , u will see the revolving unite...just on the left hand side of the revolving unit you will find a block plastic cover with a...
Thanks everyone for replying i'll try to replace and test again...thanks again
dear fourl6 , you means i have to wait like 5 minutes then only perform 693 or 1004? or perform it then wait for 5 minutes before rebooting the mc?
thanks
Hello all engineers ,
It's been years i'm having this Network Initializing problem , The network initializing just can get over it...you have to wait for hours and hours till it goes off then you...
haha spock..good call.
I`m facing the problem also on a e3520c , 1st time back in a month the code appear then i clean up the reg.clutch but it last onlt 1 month, today it happened again and i did the same thing which is...
Hi guyz ,
my office estudio e650 suddenly appear error C37 , from the services manual it says Transfer Belt Motor abnormal , anyone here could please help..Thanks
Thanks dallas....i have checked the auto continue thing..but it's the same...btw dallas...i forgot to inform that the printing image gone lower then the original and the rear edge of the printout got...
HI all KM tech,
I'm having a funny problem due to paper size error.
I'm using A4 to copy but after the paper exit,the machine still showing up error which says
Caution " Paper Size Error " ...
Thank you DLP and flyingboz....i will go and try out all your instructions later hopefully it will be fine instead of keep on printing out error msg...check the server!~ :(
have a nice day DLP...
I need your little help one method in scanning to pc using network or smb.
Where can i create the destination folder for the universal scanning?
I'm having problem key-in in username and...
Thanks MrFixIt ,
I will go and find out the rate count for the both.
There is few question i need to ask
1) Does this model Canon made it the Dev/Drum Assemblies as USED and DISPOSED ? or we...
Hello screwtape ,
First i would like to thank you for sparing your time for my query.
I just took out the magnetic roller for black. There is black developer.
Just for info ... every...
Hello all good day,
I'm having problems with blurr/light color print out.. example when i do a full gradiation print what i got is only magenta and yellow image , cyan and black is super...
HI alan Oze and Screwtape buddy ,
i'm not very sure what really happened to that machine.....but it would be great if any of you can teach me the proper steps to check or to setup in steps and...
Hi all ,
This afternoon i went to set up a Canon CLC3200 with C1 Printer Kit.
After setting up all the connectors and cable..i boot the machine up.
then i start to face problems... after...
Bro Canuck and mjarbar , thanks for replying ,
I have check from the part list of it.... the CIS comes in a set without the eLamp , mostly i think Canon dont allow us to open up the CIS as i did...
Hi all ,
I have a unit of iRC3100 that have a thin line appear from copying process.Printing from PC and System Printing have no lines...so i decided to take out the CIS unit to check see if...
bro screwtape thanks for the advise....i will go and see if can or not.
for bro Iommanxman : my fax kit confirm no problem cause i already fix in other machine with Send button ready.... it will...
Hi all , I have tried installing that same FAX Kit into other machine and it work... but NOT by popping up FAX Button but is included inside SEND Button - FAX .....
Very confusing now...... how...
good morning screwtape, OK i will dismantle the set and bring to it to some place else to test
thanks screwtape.
Peter ...... thanks for the lvl 2 entry help.... thank you , kam sia